FTO AUSTRALIA

Posted: **Sat May 27, 2006 7:14 pm**

Howsit folks,

Just wondering are the woofers in the door 6" or 6.5" ??

Thanks

Posted: **Sat May 27, 2006 7:59 pm**

6.5's

Posted: **Sun May 28, 2006 11:28 am**

Haha, mine were in such bad shape when I pulled them out! The paper cones had all but fallen away from the outer rim

Friggin rubber part disintergrated.

I replaced with 6" splits I think, needed an adapter but... basically hacked up the plastic basket and glued down a ring of mdf to screw into.

Posted: **Mon May 29, 2006 9:50 am**

Thanks for the response Bennoz and Scarecrow..

Been looking at 6" but should go the Focal or Hertz 6.5"s i think...

Posted: **Mon May 29, 2006 10:49 am**

I replaced the originals with 6's. Just need to be a little creative with mounting.

Posted: **Mon May 29, 2006 2:24 pm**

ok , now u have thrown me a googly...

so u had prob's mounting the 6"s or i will have probs with 6.5"s??

Cheers

Posted: **Mon May 29, 2006 2:57 pm**

6.5's slot straight in, 6's you will need to get creative.... all I did was butcher the existing screws into the plastic housing (making my own holes) whn fitting 6's.

Posted: **Mon May 29, 2006 3:00 pm**

copy that...

Thanks for the clear up.....

gee i cannot wait to get the standard rubbish out and some nice SQ splits in....

Peace!

Posted: **Tue May 30, 2006 6:14 am**

I have 6.5" Focals in mine, mounted on an MDF bracket I made up. Can't remember why at the time but I think I needed to.

Posted: **Tue May 30, 2006 9:51 am**

Could that be because they were a 3 scrw configuration??

I am going the Boston Acoustic SL60's which are 6.5"

No drama's really with the install...

Posted: **Wed Jun 07, 2006 12:11 am**

yeah i use to have the bostons 6.5 " that i then sold to scarecrow and i sold it to him with all the mountings. Best to fit the 6.5" as they will be nice and tight and will giv a great sound. but i do have to mention to u that u gotta make simple mounts for it with MDF.

Posted: **Sun Jun 18, 2006 5:00 pm**

6.5" fit fine...but as suggested you might need some moutings...mind already had some...sounds great IMO

Posted: **Mon Jun 19, 2006 9:07 am**

cool, cheers for the info guys....will probably rely on double layer of Dynomat for the mounting...

Posted: **Wed Jul 12, 2006 5:16 pm**

Dr_Jones wrote:I have 6.5" Focals in mine, mounted on an MDF bracket I made up. Can't remember why at the time but I think I needed to.

Oooh .. Nice. I've always been a fan of Focals. I've got a pair of 6.5" Pioneer Bullets. It's done the job .. so am considerably happy with them.

FTO AUSTRALIA

What size splits

What size splits