Page 1 of 1
FTO Head light
Posted: Tue Oct 07, 2003 2:51 am
by birdbrain
Hi Guys, I am new here and I am new with FTO. I just bought A 94 GPX a couple of month ago, one of the low beam globes was blown off, I am in Melb... does any know where i can get a new globe. I have been asking REPCO and Mitsubishi dealer and they coudn't help me out.
Thanx
Posted: Tue Oct 07, 2003 12:30 pm
by smorison
For part numbers use the "FTO Information" link we have pretty much every part number you cuold ever need for replacing something. i'm pretty sure you will find what you need here:
http://www.ftoaustralia.com/modules.php ... page&pid=9
Posted: Tue Oct 07, 2003 5:16 pm
by birdbrain
Thanx Smorison, but with the part number where i can get it?
fto headlight
Posted: Wed Oct 08, 2003 6:29 pm
by scracy
birdbrain you can goto collins mitsubishi in southbank ask for adrian in spareparts he will help you out or goto autobarn they do stock very similar globes which require only slight mod as the plugs are slightly different.
Posted: Thu Oct 09, 2003 2:56 am
by fto12345
Hi,
I don't know if this will help, if you haven't gottene the bulbs yet.
The head light bulbs that you get are all modeled.
So most of the small sedans and hatches will use a model number "H4". This is a light bulb that has two fillerments in one bulb. And the bulb it self is quite thick.
Similar to this, and FTO takes "9006" and "9005". The "9006" is for your low beam, and "9005" is for your high beam.
So you don't have to get a genuine part to replace this which will cost you quite a fair bit.
Besides, there are so much better colours out there if you need to replace them.
Cheers,