Isnt this a bit much for steel rings?
Moderators: IMC, Club Staff
-
- Grease Monkey
- Posts: 100
- jedwabna poszewka promocja
- Joined: Wed Nov 16, 2005 6:00 pm
- Location: Sydney - Australia
- Contact:
Isnt this a bit much for steel rings?
I dont know much about fto dial kits and stuff, im pretty new to this all.. but i think that the (Approximately US $52.93) for dial rings is a bit much dont you think?? that would make it almost $100 AUD for some steel rings.. they are like really expensive egg rings..( egg rings RRP $2.00 AUD)
Dont get me wrong they look nice but yeh.. i think its a bit much..
If you have purchased a set of these dial rings, please let me know how much you bought them for, and from where?
Dont get me wrong they look nice but yeh.. i think its a bit much..
If you have purchased a set of these dial rings, please let me know how much you bought them for, and from where?
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
60$ from type-f. they r expensive but i think hes the only one who makes them now. unless u wanna fit em egg rings seriously though look for his auctions on ebay uk, can sometimes get it close to half price like i did or for anyone selling their used ones there. interior parts from the uk go for some silly money though
-
- Grease Monkey
- Posts: 100
- Joined: Wed Nov 16, 2005 6:00 pm
- Location: Sydney - Australia
- Contact:
SO what should i do??
so what can i do?? i mean i dont wanna spend that much on them, do you know anyone who will sell me them for cheap!?
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Buy Them
Seems to me that if you want them that much, fork out the cash....
I did this for the stainless steel surround.
Keep an eye on Ebay though. About every couple of weeks a set goes up there and will likely be a bit cheaper.
I did this for the stainless steel surround.
Keep an eye on Ebay though. About every couple of weeks a set goes up there and will likely be a bit cheaper.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- Grease Monkey
- Posts: 289
- Joined: Sat Aug 21, 2004 5:00 pm
- Location: Barbados
- Contact:
-
- Grease Monkey
- Posts: 100
- Joined: Wed Nov 16, 2005 6:00 pm
- Location: Sydney - Australia
- Contact:
Smartarse hahah
hehe ok well aluminium whatever it is hehehe smart arse!
if someone wants to organise a group buy for this product let me knwo im in.. hehe
if someone wants to organise a group buy for this product let me knwo im in.. hehe
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
chase up kmc. hes offered them for 25 pounds for a groupie price if u read this post
http://www.ftoaustralia.com/modules.php ... pic&t=6715
http://www.ftoaustralia.com/modules.php ... pic&t=6715
- Supplanter
- Forum Moderator
- Posts: 6417
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
-
- Mechanic
- Posts: 418
- Joined: Tue Nov 16, 2004 6:00 pm
- Location: Previously NZ, now Hertfordshire, England
- Supplanter
- Forum Moderator
- Posts: 6417
- Joined: Tue Oct 22, 2002 5:00 pm
- Location: Arizona Bay
- Contact:
-
- Approved FTO Australia Trader
- Posts: 41
- Joined: Tue Jan 25, 2005 6:00 pm
- Location: Birmingham UK
Hi all,shue wrote:where did u get the needle cups from and how much did u pay for them?, only bit i dint get , looks mad as
I'm shakey j from the UK owners club, If you are interested in Needle Cups I make them and could supply enough for a group buy.
Take a look at this thread from the UK site http://www.ftooc.org/phpbb/viewtopic.ph ... c&start=20
I'm not sure who to talk to about this but if somebody points me in the right direction (Don't say down ) I could send some samples over. Also if there's enough interest I will reduce the price.
Happy New Year All!