What Do You Think

Bodykits, Interior modifications, Rice Products, anything that is for looks

Moderators: IMC, Club Staff

User avatar
dstocks
National Vice President
Posts: 9529
jedwabna poszewka promocja
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

What Do You Think

Post by dstocks »

Ok, finally got my coated interior stuff back. Must admit, im wrapped with the results.

I know wood grain isnt to everyones liking, but would appreciate comments anyway. Still need to re-upholster, to lift the interior a little more. Also, havent added the coated vents in the pictures (need to take out dash to replace these)

Image

Image

Image

Image

Image

Image

Image
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    User avatar
    SchumieFan
    Oldtimer
    Posts: 5875
    Joined: Thu Aug 05, 2004 5:00 pm
    Location: GPS signal lost
    Contact:

    Post by SchumieFan »

    its nice, i like it, very mitsubishi

    but i dont think it suits the fto.... of course, could be a completely different story once youve done the rest of your interior
    Image
    shue
    Oldtimer
    Posts: 1347
    Joined: Mon Mar 07, 2005 6:00 pm
    Location: 1000 posts n still whoring

    Post by shue »

    looks 8) how much did that set u back if u dont mind me asking? id prefer cf though :)
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    CF

    Post by dstocks »

    Yep,

    Figured most people would prefer the CF look. Cost - about $700
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      User avatar
      Supplanter
      Forum Moderator
      Posts: 6417
      Joined: Tue Oct 22, 2002 5:00 pm
      Location: Arizona Bay
      Contact:

      Post by Supplanter »

      Were there any issues with the rubber surround of the clock/voltmetre?
      LED ALL the things.
      User avatar
      dstocks
      National Vice President
      Posts: 9529
      Joined: Fri Jun 24, 2005 5:00 pm
      Location: Utopia
      Contact:

      Yep

      Post by dstocks »

      Yep, that was a bit of a worry for a while. They werent keen to do that bit. Said they could not guarantee that the finish would take properly (bubbling etc). I told them I had a spare and wasnt really concerned if it didnt work. Would have been a shame without - would have spoilt the whole look. Also said I wouldnt hold them to the warranty on it either. It came up great though. I figure that ill just have to be careful with it (keep the heat off it etc).
      Complete FTO (http://www.completefto.com.au/completefto.asp)
        Image
        If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
        User avatar
        SchumieFan
        Oldtimer
        Posts: 5875
        Joined: Thu Aug 05, 2004 5:00 pm
        Location: GPS signal lost
        Contact:

        Re: CF

        Post by SchumieFan »

        dstocks wrote:about $700
        8O :o HOLY SHHHHHHHH

        what the hell do u do for a job?
        Image
        User avatar
        dstocks
        National Vice President
        Posts: 9529
        Joined: Fri Jun 24, 2005 5:00 pm
        Location: Utopia
        Contact:

        IT

        Post by dstocks »

        Guess I should have expected that response. :)

        No, actually tried the cheaper version previously (stick-ons). They still cost $200, but wasnt at all happy with the finished product. Decided that if I had to pay to get it done properly, then so be it.

        I guess some are prepared to pay for that little bit of extra performance and some want the look.

        Come to think of it, that doesnt work either, I WANT IT ALL!!
        :twisted:
        Complete FTO (http://www.completefto.com.au/completefto.asp)
          Image
          If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
          User avatar
          BuCkEt
          Oldtimer
          Posts: 1544
          Joined: Mon Nov 01, 2004 6:00 pm
          Location: Canberra

          Post by BuCkEt »

          Personally I HATE wood grain....but holy moly.....reupholster those seats STAT!

          Do the carpet while you're at it.....and replace the wheel with a nice woodgrain one and you'll be on your way to a supercar-esque interior!!
          User avatar
          FTO338
          Oldtimer
          Posts: 6712
          Joined: Sun Feb 09, 2003 6:00 pm
          Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

          Post by FTO338 »

          ehheehehe ok ok, so whats the address & name of this place? And even wood grain isn't my cup of tea, it still looks great. :D
          DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
          User avatar
          dstocks
          National Vice President
          Posts: 9529
          Joined: Fri Jun 24, 2005 5:00 pm
          Location: Utopia
          Contact:

          Dashboard Centre

          Post by dstocks »

          Dashboard Centre in Melbourne

          http://www.dashboardcentre.com.au
          Complete FTO (http://www.completefto.com.au/completefto.asp)
            Image
            If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
            User avatar
            FTO338
            Oldtimer
            Posts: 6712
            Joined: Sun Feb 09, 2003 6:00 pm
            Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

            Post by FTO338 »

            Thanks bro, i give them a ring tomorrow, hmmm consider all the parts you got them to do, I think $700 is pretty cheap.
            DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
            User avatar
            dstocks
            National Vice President
            Posts: 9529
            Joined: Fri Jun 24, 2005 5:00 pm
            Location: Utopia
            Contact:

            Cheap

            Post by dstocks »

            Thats what I thought! :wink:
            Complete FTO (http://www.completefto.com.au/completefto.asp)
              Image
              If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
              User avatar
              Boris
              Oldtimer
              Posts: 1448
              Joined: Tue Mar 02, 2004 6:00 pm

              Post by Boris »

              looks very nice, one things that i would of left out was the seat belt guide, that just looks out of place, imo.

              if only i could afford same thing but in CF lol . :lol:
              Name: Boris
              Location: Canberra
              Rides: Mitsubishi Evo 8 MR, Volvo XC60 & 3 push bikes!
              User avatar
              Bennoz
              National President
              Posts: 23668
              Joined: Fri Jan 21, 2005 6:00 pm
              Location: Sydney
              Contact:

              Post by Bennoz »

              I have a soft spot for woodgrain... having owned a dozen or so minis' :D

              Would really set it off with all black leather seats :D
              User avatar
              dstocks
              National Vice President
              Posts: 9529
              Joined: Fri Jun 24, 2005 5:00 pm
              Location: Utopia
              Contact:

              Balck and Blue

              Post by dstocks »

              one things that i would of left out was the seat belt guide
              Yep. wasnt sure about that myself (Have black spares if I dont like them. The other bit im not sure about is the vents (not shown in pics). Dont really want the patchwork quilt look.
              Would really set it off with black leather seats
              Yep, was thinking Black with blue inserts actually (still thinking about the blue)
              Complete FTO (http://www.completefto.com.au/completefto.asp)
                Image
                If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
                User avatar
                Bennoz
                National President
                Posts: 23668
                Joined: Fri Jan 21, 2005 6:00 pm
                Location: Sydney
                Contact:

                Post by Bennoz »

                Nah.... brown... blue.... all black for sure!
                User avatar
                dstocks
                National Vice President
                Posts: 9529
                Joined: Fri Jun 24, 2005 5:00 pm
                Location: Utopia
                Contact:

                Idea

                Post by dstocks »

                Like this (yeh, I know, crap photoshop job, but hey, you get the idea):

                Image
                Complete FTO (http://www.completefto.com.au/completefto.asp)
                  Image
                  If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
                  User avatar
                  BuCkEt
                  Oldtimer
                  Posts: 1544
                  Joined: Mon Nov 01, 2004 6:00 pm
                  Location: Canberra

                  Post by BuCkEt »

                  Get the blue a few shades darker and I think it'd look pretty dang nice!
                  User avatar
                  dstocks
                  National Vice President
                  Posts: 9529
                  Joined: Fri Jun 24, 2005 5:00 pm
                  Location: Utopia
                  Contact:

                  How Much Darker

                  Post by dstocks »

                  How much darker - more like this???

                  Image
                  Complete FTO (http://www.completefto.com.au/completefto.asp)
                    Image
                    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
                    Post Reply