eye lids
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 92
- jedwabna poszewka promocja
- Joined: Sun Jul 31, 2005 5:00 pm
- Location: Strathfield NSW
eye lids
Hello everyone, does anyone know where I can get the Eye Lids for FTO in Sydney?
Thanks.
Thanks.
-
- Grease Monkey
- Posts: 252
- Joined: Sat Jan 29, 2005 6:00 pm
- Location: Townsville, North Queensland
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Shue
You got a picture of those Shue?? What shape - I know they come in several
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
-
- Grease Monkey
- Posts: 252
- Joined: Sat Jan 29, 2005 6:00 pm
- Location: Townsville, North Queensland
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- dj_ules
- Mechanic
- Posts: 585
- Joined: Mon Nov 22, 2004 6:00 pm
- Location: Newcastle
on the website it says they are $99.95
http://www.carmate.com/product_details. ... &p_id=4017
i rekon a group buy, we can get them down to 50 - 60$
theyr nothing just a bit of cut unpainted fiberglass or plastic. they should accept that. if not
i say we make your own. get some carboard,safety scissors and some clag glue,.
http://www.carmate.com/product_details. ... &p_id=4017
i rekon a group buy, we can get them down to 50 - 60$
theyr nothing just a bit of cut unpainted fiberglass or plastic. they should accept that. if not
i say we make your own. get some carboard,safety scissors and some clag glue,.
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
- dj_ules
- Mechanic
- Posts: 585
- Joined: Mon Nov 22, 2004 6:00 pm
- Location: Newcastle
i wouldnt mind some . but i definetly wouldnt be paying the amount they are asking. it probably costs them like 10$ to make they are just thin moulded pieces of fiberglass or plastic watever material its made of.. max id pay is probably 60$ , 30$ each. thats a preety fair price
they are gettin a bit greedy.
they are gettin a bit greedy.
-
- Grease Monkey
- Posts: 252
- Joined: Sat Jan 29, 2005 6:00 pm
- Location: Townsville, North Queensland
- ahew
- Grease Monkey
- Posts: 258
- Joined: Wed May 07, 2003 5:00 pm
- Location: Strathfield, NSW
This is just an idea, but if you've got a few keen people, and it's easy to make, wouldn't it make more sense to buy 1 pair of these and then get somebody who's skilled and also part of the club to spend some time (and get a little $$) to make up a few more eyelids?
The initial cost would be $100, but if it costs $10 to make it and you had even 5 people interested, it would end up costing $30-$40. If you had 10 people that would be $20-$30, 20 people would be $15-$20, etc. etc. and that would be per pair!
just have to get somebody that's willing to help with the cause
The initial cost would be $100, but if it costs $10 to make it and you had even 5 people interested, it would end up costing $30-$40. If you had 10 people that would be $20-$30, 20 people would be $15-$20, etc. etc. and that would be per pair!
just have to get somebody that's willing to help with the cause
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact: