[Fixed - Thanks For All Your Help Guys] Broken Door Locks.
Posted: Sat Aug 16, 2003 8:44 pm
Hi All, I've done something silly again...
Short Version: I am unable to lock the door from the outside because as soon as I close the door, the part which closes the door and holds it closed causes the door to unlock. Its fine if the door's already closed and I lock it... But since I can't unlock it again from the outside it's BAD! It happened essentially because... You know the part on the door that hooks onto the rectangular thing on the body so the door closes? Well the hook INSIDE the door I pressed hard on it and it went down... and stayed there... can anyone help me PLEASE!??!?! Anyone come across this before? I know if I can just rotate that part (inside the door) back to the original position it'll be perfect again, but do I need to go get a mechanic to rip my door apart to do this?
Long version: Was sound deadening and all was finished for driver's door when I decided the central locking motor wasn't tight enough, so pressed hard on the lock rotors then CLICK. I thought I'd snapped something but no, all was fine, door closed fine only whenever I closed the door while it was locked, the door would lock itself and not it won't respond to remote central locking (the electronic motor thingies still work). So then I goto the other side to check whats different and I notice that hook inside the door which latches onto the car body is in a different position, as if it'd been rotated down 90 degrees and won't rotate back up 'in reverse'. As I was l doing this I pressed on the one on the passenger side to check the shape to test my theory and CLICK it happens to the passenger side as well! So now I got 2 doors that won't lock remotely and it means I can't take it anywhere! Someone PLEASE HELP ME!!!
Short Version: I am unable to lock the door from the outside because as soon as I close the door, the part which closes the door and holds it closed causes the door to unlock. Its fine if the door's already closed and I lock it... But since I can't unlock it again from the outside it's BAD! It happened essentially because... You know the part on the door that hooks onto the rectangular thing on the body so the door closes? Well the hook INSIDE the door I pressed hard on it and it went down... and stayed there... can anyone help me PLEASE!??!?! Anyone come across this before? I know if I can just rotate that part (inside the door) back to the original position it'll be perfect again, but do I need to go get a mechanic to rip my door apart to do this?
Long version: Was sound deadening and all was finished for driver's door when I decided the central locking motor wasn't tight enough, so pressed hard on the lock rotors then CLICK. I thought I'd snapped something but no, all was fine, door closed fine only whenever I closed the door while it was locked, the door would lock itself and not it won't respond to remote central locking (the electronic motor thingies still work). So then I goto the other side to check whats different and I notice that hook inside the door which latches onto the car body is in a different position, as if it'd been rotated down 90 degrees and won't rotate back up 'in reverse'. As I was l doing this I pressed on the one on the passenger side to check the shape to test my theory and CLICK it happens to the passenger side as well! So now I got 2 doors that won't lock remotely and it means I can't take it anywhere! Someone PLEASE HELP ME!!!