Page 1 of 1
Swaybar Bushes
Posted: Wed Aug 11, 2004 6:29 pm
by Jono
hey,
does anyone know the partnumber for standard swaybar bushes?
are there any nolathane ones i can get?
thanks,.
Jono
Re: Swaybar Bushes
Posted: Thu Aug 12, 2004 10:09 am
by smorison
Jono wrote:hey,
does anyone know the partnumber for standard swaybar bushes?
are there any nolathane ones i can get?
thanks,.
Jono
i think one of our members was working on this... or was waiting on me for something.... shaun?????
Posted: Thu Aug 12, 2004 12:20 pm
by Jono
yeah,
having a bit of trouble trying to find it,
In the Workshop manual it says the fto swaybar is 16mm
Superpro offer 17 19 20 22mm i think...
Jono
Posted: Fri Aug 13, 2004 11:06 pm
by Jono
ive checked with kmac, pedders, and whiteline, they do not stock 16mm front swaybar bushes.
pedders do, but they are 18.2 mm or something like that./
Wierd huh?
Jono
Posted: Wed Sep 29, 2004 4:33 pm
by Breza
Part numbers for std Mitsu bushes are:
Front Bushes - MR197005 $6.24 ea
Rear Bushes 18mm - MR197003 $10.40 ea
Rear Bushes 17mm - MR197002 $10.40 ea
Prices are what I paid In Tassie.
Cheers
Chris
Posted: Fri Oct 01, 2004 8:44 am
by Breza
Whiteline Part Numbers for Poly Swaybar bushes are:
Front
SPF1700-16K
Rear
SPF2004-17K
SPF2004-18K
Part Numbers for Mitsu Swaybar links are:
Front MR131680
Rear MB809354
These are for a GPX..........
Cheers
Chris
Re: Swaybar Bushes
Posted: Fri Oct 01, 2004 11:09 pm
by mrx
i think one of our members was working on this... or was waiting on me for something.... shaun?????
Yep, that was me. Needed the dimensions so then I could get all the bushes made up.
On a similar topic, what about engine mounts? Anyone got the specs of one/a "spare" one sitting around? How about one of those half cuts that were floating around? Can get them manufactured to the highest grade urethane for a very reasonable price
.[/quote]
Re: Swaybar Bushes
Posted: Sat Oct 02, 2004 12:05 am
by dannyboyau
mrx wrote:
On a similar topic, what about engine mounts? Anyone got the specs of one/a "spare" one sitting around? How about one of those half cuts that were floating around? Can get them manufactured to the highest grade urethane for a very reasonable price
There are four engine mounts for the FTO two under the gearbox are the same then there is one on the drivers side of the engine and another on top of the gearbox. About a year ago i got mine made in to solid rubber at a cost of about 120 AUD each so if anyone wants them i could get them done on an exchange basis. I have a almost complete spare set for the FTO so if anyone wants a set i could get them done. I just need to source a upper gearbox mount to complete my spare set. But hopefully mrx can get them done a lot cheaper.