FS SYD: Plazmaman Cold Air Inake - SOLD
Posted: Fri Dec 13, 2013 9:56 pm
SOLD
Decided to sell the cold air intake from my racecar. I was going to hold onto this to possibly use with the new car but this is a perfect fit kit for the FTO and the reality is none of the alloy piping would be suitable, and I've since bought a different pod kit. So for sale it is
This is the original intake I ran on the racecar. Unfortunately (and unbelievably) I don't seem to have any pics of it installed in the engine bay(!?), but it's custom made by these guys for the FTO.
https://www.plazmaman.com/index.php
I expect you will need to relocate the battery. You may get away with one of the thin high performance batteries. My oil catch can was where the battery would go and I still had some clearance to the intake piping. The mounting tab bolts to an existing bolt point on the chassis rail. And the pod then sits down in behind the front bar. The K&N pod included is in very good condition and recently cleaned/oiled.
Asking price is $200. Preference given to Sydney pickup. If no takers by mid next week will consider posting.
I also have the following custom setup I'd been playing with before I decided to part out. This wraps down, under, around and inside to the front of the bar for cold forced air straight to the black 'air box'. Again this will fit straight in but again will likely require battery relocation. No pod filter included with this. $50 pickup only. Not fussed if this doesn't sell as these bits may get reused.
Thanks for looking
Decided to sell the cold air intake from my racecar. I was going to hold onto this to possibly use with the new car but this is a perfect fit kit for the FTO and the reality is none of the alloy piping would be suitable, and I've since bought a different pod kit. So for sale it is
This is the original intake I ran on the racecar. Unfortunately (and unbelievably) I don't seem to have any pics of it installed in the engine bay(!?), but it's custom made by these guys for the FTO.
https://www.plazmaman.com/index.php
I expect you will need to relocate the battery. You may get away with one of the thin high performance batteries. My oil catch can was where the battery would go and I still had some clearance to the intake piping. The mounting tab bolts to an existing bolt point on the chassis rail. And the pod then sits down in behind the front bar. The K&N pod included is in very good condition and recently cleaned/oiled.
Asking price is $200. Preference given to Sydney pickup. If no takers by mid next week will consider posting.
I also have the following custom setup I'd been playing with before I decided to part out. This wraps down, under, around and inside to the front of the bar for cold forced air straight to the black 'air box'. Again this will fit straight in but again will likely require battery relocation. No pod filter included with this. $50 pickup only. Not fussed if this doesn't sell as these bits may get reused.
Thanks for looking
