Page 1 of 1
Window keeps coming off rail
Posted: Mon Jul 30, 2012 5:42 pm
by ObsidianRadio
Drivers side window keeps coming off its rail in the black GR.
What parts?
How much?
Where do I get them?
KGO.
Re: Window keeps coming off rail
Posted: Mon Jul 30, 2012 6:23 pm
by Astron_Boy
Window channel Guide.
Dunno
Dwayne (dstocks)
KGO.
Meanwhile, have you removed the door trim to check why?
May simply be a loose bolt.
Re: Window keeps coming off rail
Posted: Mon Jul 30, 2012 9:21 pm
by dstocks
Window guides are stuffed. About $20 each
Re: Window keeps coming off rail
Posted: Tue Jul 31, 2012 1:33 pm
by ObsidianRadio
dstocks wrote:Window guides are stuffed. About $20 each
Do you have one for drivers side lying around anywhere?
Re: Window keeps coming off rail
Posted: Tue Jul 31, 2012 1:39 pm
by dstocks
Buy a new one. Go to your local Mitsubishi outlet. Part numbers are MB321765 & MB321766
Re: Window keeps coming off rail
Posted: Tue Jul 31, 2012 5:59 pm
by Kustom
Dwayne. Your the man! We are lucky to have such a great vice pres!
Re: Window keeps coming off rail
Posted: Tue Jul 31, 2012 8:05 pm
by ObsidianRadio
dstocks wrote:Buy a new one. Go to your local Mitsubishi outlet. Part numbers are MB321765 & MB321766
Cheers man, I'll go down this week then!
Re: Window keeps coming off rail
Posted: Tue Jul 31, 2012 9:00 pm
by dstocks
This is one of the rare occasions where it is cheaper to buy locally. Part is shared with a Lancer, so no grey import markup.
Re: Window keeps coming off rail
Posted: Wed Aug 22, 2012 10:49 pm
by Kustom
dstocks wrote:This is one of the rare occasions where it is cheaper to buy locally. Part is shared with a Lancer, so no grey import markup.
win win!!
--------------------------------------------------------------------------
Sent from my iPhone using Tapatalk!
Re: Window keeps coming off rail
Posted: Wed Aug 22, 2012 11:12 pm
by Daniel2019
Digging a thread up I guess.. but my passenger window sits outside the frame when I close it sometimes. Will new window guide fix this? I recently fixed the window rattle by putting a piece of cloth on the side of the little plastic holder (is that the guide?) that was worn down heaps.. Was doing it before and after I did this.
Anyone?
