FTO AUSTRALIA

I'm in need of a shifter that will screw onto the stock manual gear thread and stay on.
I will need it shipped before next weekend.
who can sell me one?

Regards.
Christopher.

http://www.rhdjapan.com/mitsubishi/de3a ... dles-boots

Several good choices, they ship fast and have an optional express parcel.
All of those ones there will screw directly onto the stock shaft and wont slip off - never had a problem with mine.
I currently have this one in gunmetal grey - can't fault it at all - perfect size shape and grip.

http://www.rhdjapan.com/okuyama-carbing ... etal-56959

I may still have my factory one laying around, I will have a look and get back to you on it.

Thanks guys appreciate it!

Ok well I have found my one, it's a momo one but it is a three screw setup not a twist on setup.
Another problem with it that I have just seen. The rubber boot inside has been pushed to far in so the screws now don't push into it, they are sitting just below the boot .

Can't we put those SCA/Autobarn knobs in our car? Or do they slip as well?
I thought any basic knob which has a thread set-up instead of screws will fit? (The one I have slips as well...so was thinking of getting one)

shadowarrior wrote:Can't we put those SCA/Autobarn knobs in our car? Or do they slip as well?
I thought any basic knob which has a thread set-up instead of screws will fit? (The one I have slips as well...so was thinking of getting one)

I think most of them are "universal" which is why they have the 3 allen key screw in type (which always seems to slip if you try). Though they might have one or two that have a thread, i dunno havn't actually had a look.

The stock shifter is sexy as it's what I had in my FTO!

So azza won't fit onto mine then?
Any cheaper options seeing as I'm just selling the car?

renzkuken1 wrote:So azza won't fit onto mine then?
Any cheaper options seeing as I'm just selling the car?

aza's momo is 3 point allen key setup as well, it will fit but it will get loose in no time.


and yeah, those allen keys knobs are crap. it'll slip off anytime.
i fixed mine by duct-taping the stick before slipping on the knob and tighten the allen keys. So far so good.

phunkydude wrote:

renzkuken1 wrote:So azza won't fit onto mine then?
Any cheaper options seeing as I'm just selling the car?

aza's momo is 3 point allen key setup as well, it will fit but it will get loose in no time.


and yeah, those allen keys knobs are crap. it'll slip off anytime.
i fixed mine by duct-taping the stick before slipping on the knob and tighten the allen keys. So far so good.

Betcha I can spin it


--------------------------------------------------------------------------
Sent from my iPhone using Tapatalk!

Ok who has a stock screw one I can buy!?!? Or any screw one lol

i got a stock one think its stock just screws on, $20 + post if your interested

Kustom wrote: Betcha I can spin it

yeah, it's not real tight.
Still prone to a little wiggling but least it's working ok for shifting without getting all loose.

Ive got a b&m carbon shifter on mine and it screws onto the thread

phunkydude wrote:

renzkuken1 wrote:So azza won't fit onto mine then?
Any cheaper options seeing as I'm just selling the car?

aza's momo is 3 point allen key setup as well, it will fit but it will get loose in no time.

If they are put on the right way they will not loosen.

Stock ones are around $90 from Mitsubishi Japan.

phunkydude wrote:

renzkuken1 wrote:So azza won't fit onto mine then?
Any cheaper options seeing as I'm just selling the car?

aza's momo is 3 point allen key setup as well, it will fit but it will get loose in no time.


and yeah, those allen keys knobs are crap. it'll slip off anytime.
i fixed mine by duct-taping the stick before slipping on the knob and tighten the allen keys. So far so good.

In my old lancer I got so sick of it coming off that I filled the knob with araldite and then tightened it - didn't budge then!