FTO AUSTRALIA

Yesterday I changed the heater core over.

Id rather stab myself in the eyes with s pencil than do that again

Anyway, the manual dial selector for the fan doesn't turn all the way to the face setting.


It's about 4 clicks too short. I can put force to it and it goes but when I let go it moves back 4 clicks to the face and foot setting. Is the mechanical bit bit for that down near the heater core or is it somewhere else?

The heater also doesn't get as hot as it used to. Are the two related? Ie have I not put it together correctly?

Mine is the same but only with the heater not being as hot anymore sucks all my setting still work when I changed them bugger

Sounds like you've either pinched the selector cables behind the dials, or you stretched them & need to readjust at the dial end.

Bennoz wrote:Sounds like you've either pinched the selector cables behind the dials, or you stretched them & need to readjust at the dial end.

^
Had the same thing in my wagon.

The cable in the holders need to be moved either closer or further away from the dial cluster, this enables them to move accordingly.

Astron_Boy wrote:

Bennoz wrote:Sounds like you've either pinched the selector cables behind the dials, or you stretched them & need to readjust at the dial end.

^
Had the same thing in my wagon.

The cable in the holders need to be moved either closer or further away from the dial cluster, this enables them to move accordingly.

Cheers guys, I'll have a look into it tomorrow, got the day off work