FTO AUSTRALIA

Hey I just bought myself a viper 5701 alarm system with remote start feature it needs a rpm signal to tell it when the engine has started so it will stop cranking just wondering if anyone has installed one of these and if so where would be the best place to get the RPM signal from

Thanks heaps in advance

I spliced into the taco wiring for my shift light, so did Bennoz.
It runs from the ECU in the passenger footwell to the back of the instrument cluster, and it is a White wire.
Bennoz spliced in @ the ECU end of the wire I believe.
I spliced in behind the instrument cluster by removing the cluster, which is easy to do.
Need more info? just ask

Sweet is there only one white wire coming out of the ecu or do I need to test the wires for it

And splicing in at the ecu won't be too hard for me at the moment considering my interior looks like this at the moment



I'm finally getting around to installing my massive sound system and alarm system so I striped the interior to lay the wires in neat

nice dash, is it hand painted/air brushed?
Hahahaha thats how my interior looked when I installed sound and alarm.
all my under carpet interior is painted the same colour as the outside, yours seems to be all undercoat
I would test the wire anyway, the volts will rise with a rev of the engine

True well that will have to be a job for tomorrow as I am currently half way through relocating the battery to the boot for a duel battery system and I need new battery terminals so I can't connect the battery to run the car lol

And the interior is airbrushed you can see more of it in shenal's worklog I don't like it myself it came like that I want to get it re-done but that's the last thing on my to do list and I'm pretty sure the under carpet colour is the stock silver as I'm pretty sure this didn't come in pink from stock lol and the engine bay and boot are the same silver but I have painted the engine bay black to make the shiny engine stand out

there is a spare pick wire in engine bay from memory its brown or white and usuallyy taped with atmospheric sensor below washer motor near main loom

Sweet as I'll have a look now

Haha i wanna come out and have a look

You can come and give me a hand tomorrow if you want I'll be working on it all day

Or just have a look I don't care

Yeh might come have a look i can bring a soldering iron and crimps etc. I have all the workshop manuals printed out and in folders if needed as well.

I got a soldering iron already and enough crimps I'm going to go get a couple more tomorrow though
do you want my address

Thanks vipfto that wire was definitely the easiest to find and it even has a plug on the end of it already to make life even easier

O and silver I do live at kallangur which is pretty far for you just thought I would let you know before you got too keen in coming over

Shenal wrote:Thanks vipfto that wire was definitely the easiest to find and it even has a plug on the end of it already to make life even easier

no probs

Shenal wrote:O and silver I do live at kallangur which is pretty far for you just thought I would let you know before you got too keen in coming over

Thats too far sorry buddy.

Haha lol I thought so
All good man you just seemed keen to have a look you'll just have to wait till its all back together and I can go with yous on another cruise or something

Nah i wouldnt normally mind the distance, just going out to phi-tecs today to pick him up to get some carparts for his fto and driving around and all that.

I should have my fto back soon as well so yeh a cruise or mountain run should be on the cards very soon.

Keen