Page 1 of 2
New guy from Adelaide
Posted: Tue Mar 27, 2012 10:17 pm
by o0s130o
Hi guys new to here
name Justin From Adelaide living around croydon area,
got a black FTO GR with Version R Aero kit,
but the idle is not working on the speedo, no ideas wt's going on,
hope to find some guys that well-known on FTO can give me a hand.
If someone that from Adelaide then that will be great
Thanks for your times guys and have a nice day
Justin
New guy from Adelaide
Posted: Tue Mar 27, 2012 10:19 pm
by Sahin
Welcome to the club
Post a photo of your car

Also I think the sensor that makes the rpm meter work is on the top of the gearbox
Re: New guy from Adelaide
Posted: Tue Mar 27, 2012 10:34 pm
by kiz
Firstly mate, welcome to the club.
Fellow South Aussie, there are three others of us currently active, VipFTO (state coordinator), ObsidianRadio and myself.
You just missed this months meet, was on Sunday.
Check the state board for the next one
We've spotted you FTO, well Jack did anyways (if it was the one on Hinley street a few weeks ago that got thrown up on one of the rims?) haha
Tim will be able to help you out for a small price (if you ask him nicely and treat him with respect, ey Tim??)
Should see you around next month

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 3:33 am
by ObsidianRadio
Hi Justin!
Welcome to the forum, and the club as well!
Can't wait to see some pics of your ride...If it was you with the vomit-coated rims on Hindley the other week...You made me chuckle! If not....Nice! Hahaha.
Hopefully we'll all be able to have another Adelaide meet soon

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 3:52 am
by kiz
ObsidianRadio wrote:Hopefully we'll all be able to have another Adelaide meet soon

Well hopefully this meet in April goes ahead

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 10:31 am
by o0s130o
hi guys
Thanks for the fast reply first,
i didn't go to hinley street for past few weeks,
My ride is just GR MT FTO with Version R full kit + 17" Work CR kai rims
stock like a rock, will try to solve the problem asap coz sick of driving a car without rpm signal>.<
Nice to meet you guys again*~
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 10:32 am
by o0s130o
Also,
If u are talking abt the guy who vomit on that night then i know who he is, not a fd of mine but i know that guy,
black AT FTO GPX with aftermarket wheels~
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 11:08 am
by Technikhaus
if the RPMs are not showing at all, it could quite likely be the ignition failure sensor.
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 12:38 pm
by o0s130o
so where is that sensor located??
Thanks again
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 1:25 pm
by Vectose
WTTC mate, also theres no such thing as a Version R kit. Only body difference between a Version R and other models is the spoiler which was also an option on all 97+ FTO's.
And of course all Version R's were facelift models but so were all the other FTO's made from 97 onwards.
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 1:34 pm
by Technikhaus
o0s130o wrote:so where is that sensor located??
Thanks again
Just below the intake pipe, it's bolted to the engine, with a cable plugged in.
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:07 pm
by o0s130o
Technikhaus wrote:o0s130o wrote:so where is that sensor located??
Thanks again
Just below the intake pipe, it's bolted to the engine, with a cable plugged in.
So is it a 2 wire or 3 wire sensor?
Thanks again know nothing abt FTO

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:11 pm
by o0s130o
just go to google n doing some research, the sensor that u mentioned is for starting,
i think this is not the one i am looking for.
my car can start n drive normally just without rpm showing on the cluster.
the link that i looked at:
http://www.camskill.co.uk/m3b0s9p5834/_ ... _0_V6_DE3A
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:21 pm
by kiz
Vectose wrote:WTTC mate, also theres no such thing as a Version R kit. Only body difference between a Version R and other models is the spoiler which was also an option on all 97+ FTO's.
And of course all Version R's were facelift models but so were all the other FTO's made from 97 onwards.
Mate, I take it you don't have a GPvR. There is far more differance than just a spoiler

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:24 pm
by Vectose
kiz wrote:Mate, I take it you don't have a GPvR. There is far more differance than just a spoiler

Actually, I do have a GPvR. And if you notice I said BODY differences.
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:29 pm
by kiz
Vectose wrote:kiz wrote:Mate, I take it you don't have a GPvR. There is far more differance than just a spoiler

Actually, I do have a GPvR. And if you notice I said BODY differences.
In which case i'll add that they are lighter

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:33 pm
by Vectose
Haha, yes but I was referring to body shape as the OP is saying he has a "Version R full kit"
Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 6:37 pm
by kiz
Vectose wrote:Haha, yes but I was referring to body shape as the OP is saying he has a "Version R full kit"
Yea, but he's new, and was hoping he'd have something no-one else has, as everyone is when they first get a new car

.
See ours came with all the goodies, other people have to fork out heaps of money and time aquiring them

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 7:00 pm
by vipfto
Technikhaus wrote:if the RPMs are not showing at all, it could quite likely be the ignition failure sensor.
Hey mate Welcome
Above is most likely your issue, happy to check it out for you and of course replace part if needed......
We are having another meet next month check the SA boards come along meet us

Re: New guy from Adelaide
Posted: Wed Mar 28, 2012 7:29 pm
by o0s130o
vipfto wrote:Technikhaus wrote:if the RPMs are not showing at all, it could quite likely be the ignition failure sensor.
Hey mate Welcome
Above is most likely your issue, happy to check it out for you and of course replace part if needed......
We are having another meet next month check the SA boards come along meet us

Thanks for your help first, can't wait to see you guys and giving me a hand
got another problems( Not one !) that makes me tired....