FTO AUSTRALIA

hey guys i'm half way threw an alarm install and just need to work the central locking part. it has the central locking up grade in the doors but when connected to the alram system it doesn't work so i'm thinking it needs to be connect to the module. but yeah if some one has done this before some guidence would be great

thanks Chris

Yeah you gotta wire in to the module. Cant tell you exactly what wire off the top of my head, but the module is located up under the steering column. Looks kinda like a relay with about 4 or 5 wires going into a small black box.

Manually lock ya doors and use a multimeter to test which wire pulses to ground on ya central locking relay. Do the same for unlock.

cool cool thanks for that guys i'll try that in the morning