Page 1 of 1
GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 4:26 pm
by -Nighthawk-
Hey guys,
I purchased this a while ago to upgrade my rear drop-links:
http://camskill.co.uk/m3b0s10p205/_SUPE ... S_-_NOT_GX
But have since found they have a full kit available:
http://camskill.co.uk/m3b0s10p1004/_CAM ... and_1_8_GS
How would I go about getting the bolts / washers? Or can I use the standard bolt still and purchase washers? (I don't think the factory one has washers).
Thanks
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 5:56 pm
by Bennoz
Yes mate, the factory ones have washers & the spacer tube just as pictured in the Camskill kit.
Just pull your old assembly apart & pop your new bushes in, peice of piss
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 6:02 pm
by -Nighthawk-
Thanks Ben, sure the stock bolts are ok to use? (ie: they don't bend easily)
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 6:04 pm
by Bennoz
-Nighthawk- wrote:Thanks Ben, sure the stock bolts are ok to use? (ie: they don't bend easily)
They'll be fine unless your car is lowered. If the car is lowered it puts the bolt at a bad angle into the sway bar, in which case the fix is shorter bolts & a shorter spacer tube (52mm to be precise)
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 6:05 pm
by -Nighthawk-
Ok cool, my car isn't lowered. May as well replace the rear ARB bushes while I'm at it
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 6:21 pm
by Bennoz
Good call. They're easy done too.
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 9:42 pm
by payaya
They are a common bush and can be had from super pro for a 20!
Re: GR Rear Droplink Bolts / Washers
Posted: Thu Nov 10, 2011 10:35 pm
by -Nighthawk-
Yeah I've already got quite a few to install that I've had for a while (front ARB, rear ARB, front bottom arm front, front bottom rear etc.). Might get some of the front ones done by a mechanic