Page 1 of 1
Ignition ring light
Posted: Sat Jan 29, 2011 10:24 am
by Supplanter
What size is it? I'm guessing T5...
Re: Ignition ring light
Posted: Sat Jan 29, 2011 3:55 pm
by Shhtuart
Correct.
T5 wedge.
Re: Ignition ring light
Posted: Sun Feb 06, 2011 12:34 am
by Supplanter
And how does one go about getting to the f:evil:cking thing? I took the column shroud off but after that I got a bit lost.
Re: Ignition ring light
Posted: Tue Feb 08, 2011 4:53 pm
by Supplanter
Anyone, anyone?

Re: Ignition ring light
Posted: Thu Feb 17, 2011 10:07 am
by Grue
Not a biggy mate. you only need to remove the lower plastic from the steering column. 4 screws - 2 at the front either side of the 'raise/lower steering wheel' lever, one in the deep hole, and one right at the back near the base of the lever.
Now, stick your head in under there and look up from the floor, in behind the silver metal of the ignition. You'll see a T5 bulb connector in up behind there tucked away almost out of reach - pretty identical to the one on your ciggy lighter. with one finger from below, and one from dash-side, you can twist it anticlockwise and pop it out. Bit fiddly, but doable. One T5 wedge LED will pop straight into the holder... and re-assemble!
Re: Ignition ring light
Posted: Thu Feb 17, 2011 10:36 am
by Bennoz
You
have replaced every globe in an FTO haven't you Grue?

Re: Ignition ring light
Posted: Thu Feb 17, 2011 11:04 am
by Grue
ohhhhhh yes

Repeatedly
Can't go 18months without changing colour schemes!
Re: Ignition ring light
Posted: Thu Feb 17, 2011 11:09 am
by Bennoz
Re: Ignition ring light
Posted: Thu Feb 17, 2011 12:07 pm
by Kustom
Grue wrote:one in the deep hole, and one right at the back near the base.

Re: Ignition ring light
Posted: Thu Feb 17, 2011 1:22 pm
by Bennoz
Re: Ignition ring light
Posted: Thu Feb 17, 2011 3:14 pm
by Grue
Get in there boy... nice and deep like.
Re: Ignition ring light
Posted: Tue Sep 20, 2011 7:15 pm
by Valandis91
Sorry to resurrect this!
But i had an attempt to change mine today.
Got to the bulb took it out put new T5 bulb in but no love
Why wouldn't it work? i noticed the new one had two little capacitors in it could that be why?
All i want is it to work

Re: Ignition ring light
Posted: Tue Sep 20, 2011 7:36 pm
by Connor_1994
LEDs are tempermental little bastards that only work one way, so try turning to opposite side, if that dont work, make sure the wire is onnected to the bulb,
then let me know if you still have trouble,
im about to go and change mine right now, haha
Re: Ignition ring light
Posted: Tue Sep 20, 2011 7:51 pm
by Valandis91
yeah tried both sides!
Checked all wiring as well :s
Re: Ignition ring light
Posted: Tue Sep 20, 2011 8:09 pm
by Connor_1994
hmm, try a different bulb?
maybe that one is faulty,
i dont think there is a fuse for that, unless it runs off interior light fuse, id check that fuse just to be sure,
but i would say a dodgey bulb at this stage
Re: Ignition ring light
Posted: Tue Sep 20, 2011 9:45 pm
by Connor_1994
i replaced mine earlier, not a problem, once i plugged it in the correct way,
as for why yours dosnt work, i would say dodgey bulb, i cant think of anything at the moment,
is it one off ebay, or onr from monza from autobahn
Re: Ignition ring light
Posted: Tue Sep 20, 2011 9:49 pm
by Valandis91
Its from jaycar...
bit annoying!
Re: Ignition ring light
Posted: Tue Sep 20, 2011 9:53 pm
by Connor_1994
oh, i didnt look at the bulbs in jaycar,
take it back and say it broken, haha
Re: Ignition ring light
Posted: Wed Sep 21, 2011 1:24 pm
by Supplanter
I blew a fuse when I took mine out, can't remember which one though.
Re: Ignition ring light
Posted: Thu Sep 22, 2011 5:53 pm
by Connor_1994
i thought it just ran off the interior light fuse,
i did mine, no problems what so ever