FTO AUSTRALIA

Does anyone know the part numbers for this as well as where to get them?

Asking here, in the event something better than camskill shows up.

Cheers.

hmm, found some information.

Anti roll bar bushes

http://www.camskill.co.uk/products.php? ... b0s10p7732

MITSUBISHI OE GENUINE PARTS - SERVICING PARTS, TUNING SPARES & SERVICE ACCESSORIES - Standard Front Anti Roll Bar Bushes -

PRICE: OUR PRICE £6.74 inc.VAT

http://www.camskill.co.uk/products.php?plid=m3b0s10p204

SUPERFLEX - Front Polyurethane Anti Roll Bar Bushes -

PRICE: OUR PRICE £7.25 inc.VAT


AKA: spf 1344 16k from Fulcrum

Thats the ones. Did you look in the suspension thread?

Fulcrum in QLD stock them.

Yeap, found them using search, so decided to put all in one little thread.

BTW, do you know the diameter for the front sway bar?
Emailed Fulcrum and they told me to get from WA suspension, but they need the diameter as well.

I am guessing 16mm?

Yeah 16mm

Bennoz wrote:Yeah 16mm

Sweet!

Have ordered and will be arriving on Wed's afternoon.
No existing stock so will need delivery from the Eastern states.

$17/- all up, for the bushes.

Fitted!! The bushes from Fulrum are called Super Pro SPF 1344 16k

Description said its for the Vr4 / Legunn, from memory.

Car feels quiet and great again!

About 2 hours labour to get it fitted though.


Listing here to help out.

Nice

Every bush you could imagine for the FTO is already listed here:
viewtopic.php?f=10&t=5944&start=40

Bennoz wrote:If going for Poly bushes - then you must do ALL you bushes poly. Else you will find, if you put poly bushes in places that connect to rubber bushes, you will tear those rubber bushes to pieces. The stiffness & rebound rate of all bushes on a connecting shaft or joint must be the same or the weakest link will fail - hence I have to sort these droplinks out....

Oh bummer, is that partially why my original front bush died?

Had some poly bushes fitted on the rear suspension when we replaced the following:
KYB gas excel g shocks
rear OE short dog bone
rear trailing arm poly bushes
Also:
rear OE droplinks(fitted about a month earlier)
front OE droplinks(fitted about a month earlier)

Depends on the suspension 'circuit' of bushes being replaced. In the case of the front swaybar, there are only 2 bushes in the 'circuit' - therefore just replacing the 2 in poly will be ok.

Droplinks are droplinks, nothing much to worry about there, but when you say "rear trailing arm poly bushes" you mean the front, rear trailing arm control bush? The one that the rear arm hinges from?

Bennoz wrote:Depends on the suspension 'circuit' of bushes being replaced. In the case of the front swaybar, there are only 2 bushes in the 'circuit' - therefore just replacing the 2 in poly will be ok.

Droplinks are droplinks, nothing much to worry about there, but when you say "rear trailing arm poly bushes" you mean the front, rear trailing arm control bush? The one that the rear arm hinges from?

Erm, not very sure, but its this: http://www.camskill.co.uk/products.php? ... b0s10p4248

Supercheap sell them for under 20 bucks.

payaya wrote:Supercheap sell them for under 20 bucks.

Which bush you meant?

I dunno about less than $20 payaya, that's actually quite a large bush. I bought mine from Auto One & they were about $70 from memory.

Thought you were taking about the sway bar bush. Dunno how much the other ones are.

payaya wrote:Thought you were taking about the sway bar bush. Dunno how much the other ones are.

I got mine for under $20/- too.