FTO AUSTRALIA

Hi all still can't start the car but confirmed fuel is flowing all the way to the fuel rails and I've got spark but no power to the fuel injectors. 20amp MPI fuse also tested and working.

I've sifted through the electrical wiring diagrams and can't seem to find what else shares the fuel injectors circuit. Any thoughts?

Or....any ideas why I've got no power going to injector plugs?

When you say NO power to the injecors. DO you mean at the injectors themselves or out of the ECU.

If you mean the injectors check the wire at the ecu outputs. IF you have no signal out of the ecu, I would try to get hold of a spare ecu to check if that is your problem. If you have signal at the ecu but not injectors then it sounds like either a fuse/relay related issue or you have missed a plug

There's no power at the injector plugs themselves. It's awesome that you know it's from the ECU coz I couldn't figure it out from the wiring diagrams. I'll check at the ECU end.....lucky I gotta spare one of those

Nice good luck

so you MIGHT of blown up the ignition failure sensor
you can by pass it ,.. or you could just goto the wreckers and get one to replace it in urself..

goodluck ..