FTO AUSTRALIA

Tried to cut the wires off the connecter to the stock volt meter gauge, and it somehow tripped on something.

Realised the tacho and speedo have no signal at all. I have checked all fuses and it all seems to be working.

the car still starts and go, but i dont know how much rev and how fast im going!

please help!

If you put your foot flat and don't shift it will fix itself

Also don't do what I say

ha ha you must of cut power to dash too re-connect where you cut then get test light out and be careful what yu do/dont cut

the incident blew the fuse and i replaced it but put in the wrong slot! stupid me!