Page 1 of 1
Bumper light size
Posted: Sat Feb 06, 2010 5:21 pm
by nikhan
Hey guys, as the topic name suggests (not so sure if that is the correct term). One of them bumper lights has blew and im thinkin of replacing them both with white globes. Anyone know the size of that bulb?? I know its a pain in the ass to change as there are 2 long screws which connects the whole light to the frame...zzZzzz
Posted: Sat Feb 06, 2010 9:40 pm
by payaya
H4.
Posted: Sat Feb 06, 2010 10:10 pm
by Grue
Guessing it's a Series 2 bumper?
Posted: Sun Feb 07, 2010 12:21 am
by nikhan
nope its a 95 gpx.
Posted: Sun Feb 07, 2010 7:19 am
by Grue
in that case....
Parkers/driving lights are a T10 Wedge bulb.
Foglight (if you've got them, some pre-facelifts don't) is a H3 bulb
The SMD chip type LED's are the whitest you'll get. Not the brightest, but the closest to HID white as you'll get.
Easy to change. 1 long screw, and push the pod out from behind. Can be a bit tough if it hasn't come out very often, but once you've done it a few times, pops in and out nicely. Others prefer to get underneath and change the bulb without removing the pod, but can't be arsed with that.
Posted: Sun Feb 07, 2010 8:14 am
by payaya
Damn proves how long its been since I changed my fogs. H3 it is.
Posted: Sun Feb 07, 2010 1:29 pm
by nikhan
Ok..thanks guys. Imma gonna try to do it myself. Just a quick question. Are the foglights the one that u can turn it on with the button at the right had side of the cluster?? because the one im goinng change is the bumper lights that also come on when u on the headlights.
Posted: Sun Feb 07, 2010 2:35 pm
by xj265
Yep the foglights are switched on seperatly by that switch next to the steering wheel and the ones your gonna change are the parkies
Posted: Sun Feb 07, 2010 4:56 pm
by nikhan
ahh...ok . T10's it is then.