FTO AUSTRALIA

There's no pressure at all in the Clutch, it's just limp.. can't put car into gear. I've checked the clutch fluid, still topped up, nothing leaking

Check the slave cylinder on the gearbox - it leaking?

bah.. yes it is! calling a tow truck now..

Best be callin' Kempys too!

Is kempys in sydney? My mechanic called a couple of places and nobody has the part listed so he's going to take it off and send in a sample and try to get a new part for it (no DIY day for me 2moro

Most probably is the slave cylinder. U might wanna check the seals if its leaking clutch fliud. Try topping up the clutch fluid and get someone to keep pumping the clutch. If the bottom of the car is all wet then yeah...the slave cylinder or the seals. Mine happened the same as u before a couple of months ago. Its a pretty quick job which can be done in a day and should cost bout less than 150 bucks for both labour and reconditioned parts. Kempy's is in New Zealand and u might wanna call in the parts soon as it takes a while for the parts to arrive. Or u might wanna get a reconditioned one but i guess it wun last tat long before u need to change a new one again. Cheers

Dam thats sucks mate. Talk about bad luck ...

Yea, I looked up Kempy's and saw it's in NZ.. ah well, sh*t happens

I reckon if your still got fluid and it's not leaking then i would get under the dash and check to see if the peddle is still connected to the master cylinder rod.

this happened to me 2 weeks ago in my driving test!

anyway it was the seal inside the slave cylinder which burst, if you take it out and have a look inside to see if the cylinder is still relatively smooth you can just go to repco and buy the slave cylinder kit, and you can replace the seal yourself. Costs 20 bucks

If not then probably get the whole part, and im pretty sure that the galant cylinder is not the same like ive read on some other post