problem?
Posted: Sat Mar 15, 2008 8:27 pm
hellooo there~~just little question about headlight...previously i find my headlights are so dull~~wanna replace them~~is it ok i just put new hid bulb there???what should i do?
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://www.ftoaustralia.com/v3/
problem?
Page 1 of 1
Posted: Sat Mar 15, 2008 9:54 pm
er??,.no body answer me////
Posted: Sat Mar 15, 2008 10:15 pm
the stock bulbs are pretty crap in the FTO.
if you want to go HID kit then they cost a fair bit and require you to bolt in a transformer pak (1 for each headlight), but they are still plug'n'play. They noticably change the brightness though.
someone will hopefully be along shortly to back me up on this but i think that they are illegal.
if you want brighter without resorting to HID's then just go buy some ultrawhite bulb replacements, not as bright as HID's but still better than stock
if you want to go HID kit then they cost a fair bit and require you to bolt in a transformer pak (1 for each headlight), but they are still plug'n'play. They noticably change the brightness though.
someone will hopefully be along shortly to back me up on this but i think that they are illegal.
if you want brighter without resorting to HID's then just go buy some ultrawhite bulb replacements, not as bright as HID's but still better than stock
Posted: Sat Mar 15, 2008 11:02 pm
all right...what types of bulb should i choose for drving and high beam(h1,h4?)?
Posted: Sat Mar 15, 2008 11:30 pm
Just take your old bulbs into supercheap or autobarn and they will get the right ones for you 
Posted: Sun Mar 16, 2008 9:44 am
HB4 for low beams and apparently HB5 for high beams. Just by a hid kit can get em roung the $100 mark. But i warn you they are not legal but i havent heard of anyone ever getting done for them. Sams been defected for almost everything on his car but never his lights 
Posted: Wed Mar 19, 2008 9:55 pm
Put your high breams in your low beams and aim your lights further into the distance! trust me.
Posted: Thu Mar 20, 2008 5:13 am
+1 due to the projector covers on the low beem standard lights are S**T, so do a swap as said above and you will be all goodpayaya wrote:Put your high breams in your low beams and aim your lights further into the distance! trust me.
