Page 1 of 1
air ram pipe question ??
Posted: Mon Feb 25, 2008 2:39 am
by tintin
ive had a play with the new air ram cone to day got the ally pipe the right lenght . i took my iduction pipe a part to use the rigrt angul bends looking at it ill ether have to cut the pipping down and use 3 90 degrees pipes or 1 90 degree and a 180 degree or 2 90's and a 20 degree kink
what do you think will be best?
thanks
martin
Posted: Mon Feb 25, 2008 5:08 am
by mr-charisma
why you using the alloy piping for an air ram? should get yourself a length of some plastic flexi hose with a decent diameter.. not only is it lighter, but its more forgiving in the bends..
anyways... 2 90's with a 20 degree kink is the lesser of three evils..
depends on your setup as to what oyu can get away with i spose..
Posted: Mon Feb 25, 2008 7:52 am
by tintin
mr-charisma wrote:why you using the alloy piping for an air ram? should get yourself a length of some plastic flexi hose with a decent diameter.. not only is it lighter, but its more forgiving in the bends..
anyways... 2 90's with a 20 degree kink is the lesser of three evils..
depends on your setup as to what oyu can get away with i spose..
cheers.
the reson im not using flexi pipe is cos its got ribs in so the air wont flow as much . say as silicone hosing and ally pipe
Posted: Mon Feb 25, 2008 2:38 pm
by mr-charisma
fair enough, 2 easy .. whats the biggest flexi pipe you can go vs the biggest alloy pipe?
Posted: Mon Feb 25, 2008 9:02 pm
by tintin
mr-charisma wrote:fair enough, 2 easy .. whats the biggest flexi pipe you can go vs the biggest alloy pipe?
im using 3" / 76mm alloy pipe with 3" / 76mm silicone hosing