FTO AUSTRALIA

Posted: **Thu Feb 21, 2008 11:00 am**

any one have a clue about where to get
ngk PFR7M or ngk BKR7EKC-N spark plugs here?

Posted: **Thu Feb 21, 2008 12:38 pm**

i got my iridium spark plugs from Autobarn, just get them to order them in for you.

Posted: **Thu Feb 21, 2008 4:38 pm**

lol ok which spark plug do you recommend then for the fto? i've got a 95 gpx mivec auto... i went to service it a few days ago and the mechanic said they needed a special tool to even reach the spark plugs which unfortunately they didnt have and i need to change it asap! so whats should i do?

Posted: **Thu Feb 21, 2008 5:49 pm**

Bullshit all you need is an extension bar on the end of the plug socket.....am i not correct??????

Posted: **Thu Feb 21, 2008 6:47 pm**

Sort of... you need a 19mm spark plug socket, but you need to shave a couple of mm of the outside diametre as its a real tight fit. I used a bench grinder to do so. Either that or go buy a 19mm tube spanner. This is issue is only common to Mivec heads too.

Posted: **Thu Feb 21, 2008 6:52 pm**

the mechani said that he needed something to remove the manifold to reach the 3 rear spark plugs so yea he couldnt replace the spark plugs for me =/

Posted: **Thu Feb 21, 2008 6:56 pm**

The manifold is held on by 2 10mm nuts, about 8 8mm bolts on the top & 4 12mm nuts on the back.... couple of electrical plugs after that & it comes off. Go to another mechanic.

Posted: **Thu Feb 21, 2008 7:38 pm**

I 2nd what Ben said, even I can take it off and change the plugs

its not that hard just a bit of a stuff around to do thats all.