Page 1 of 1
Spark plug removal tool.
Posted: Wed Dec 24, 2003 4:09 pm
by scracy
Just wondering if the sparkplug removal socket came standard with your cars as part of the wheel brace kit or did anyone have to purchase theirs as a seperate item. Mine to my suprise came with the car, is this standard?
Posted: Wed Dec 24, 2003 11:19 pm
by payaya
its just a normal spark plug took i guess, i used a normal one on my rear banks and it worked fine.
Posted: Tue Dec 30, 2003 1:41 am
by patty
i got mine with the car
Posted: Tue Dec 30, 2003 11:40 am
by scracy
Ok so it seems to come standard with the car?
Re: Spark plug removal tool.
Posted: Thu Jan 08, 2004 10:02 pm
by Blaze
I bought a normal 11/16 inch (or 17mm) tool from supercheap.
I changed all the plugs and takes longer than i expected coz, the holes where the plugs are, have "bottle-neck" inside.(i dont know what the purpose is). So, i have to grind the tool a little-bit.
Does anyone notice it? Is it normal?
Posted: Fri Jan 09, 2004 12:27 am
by payaya
i used a normal sydrome socket set, and i can tell you i had no bottle neck.
Posted: Sun Jan 11, 2004 5:31 am
by MarkFTO
GPX fto's have an internal reduction which either requires a special tool or as mentioned above a little bit of grinding to the socket to make it fit.
The GR doesn't have this problem.
//\\//\\ark
Posted: Mon Jan 12, 2004 9:29 pm
by OzFTO
I ground a cheap plug socket either side - if you need more info I can send a pic.