Posted: Sun Nov 20, 2005 1:42 pm
Just to show the twin exhaust set upshue wrote:yo max are u gettin a wide body conversion as well or was that pic just to show the twin exaust set up?
FTO AUSTRALIA
Welcome to the f**king old FTO Australia forums!!
https://www.ftoaustralia.com/v3/
Had an Accident
Page 4 of 5
Posted: Tue Nov 22, 2005 10:01 pm
mxysxy wrote:Here is the first question;
If I get rid of the indicators would my car be defect?
As far as I know there are some production cars that don’t have side indicators, however, not sure.
Secondly, I am absolutely newbie when it comes to exhaust modifications.
However, getting the extractors and exhaust done is in my project plan later next year.
Furthermore, here is what I want to do visually.
I want to have 2-output setup from 1 muffler.
So, think about this
Instead of those bloody big round outputs, nice looking doubles
Is this possible? Do you think it will look good?
I am assuming where the this side of the muffler has to be accommodate 2 more output pipes. Is this correct? And would this mod affect the performance in a negative way.
Posted: Tue Nov 22, 2005 10:17 pm
As you can see my muffler is a single entry, twin pipe exit. I cant see why you couldn't take the exhaust pipe exiting the muffler closest to the rear of the car & swing a length of pipe round & out to the other side. Performance changes would be negligable - note how the piping leading in to my muffler is nice and smooth (aka mandrell bent) where-as the tail pipes are machine bent (got slight compression on the bends)?? thats because once the gas has passes through the muffler the job is done. You could stick whatever tail end on you like. Performace work has already been done. If you were to spilt the pipes further down the line - say after resonator, then you'd start seeing performance changes.
Posted: Tue Nov 22, 2005 11:05 pm
nice idea...not that I'm an expert but I thought the entire length has to be tuned/matched..as the gas still needs to be pushed out after the muffler..basicly the gas will flow thru the path of least resistance (the shorter length I assume as the pressure will be less) and the longer pipe will be somewhat useless but look nice. Maybe that was the idea 
Posted: Wed Nov 30, 2005 6:05 pm
Guys, I have asked the panel shop the get rid off the aerial at the back, seal it, and paint it ower.
Is there any aerial that can be placed inside the car? something better then the current japanise one sticked to the back window.
Also, I will ask him to create a bonnet scoope just like the ones in the wiper. What do you guys think of this? is it possible first of all?
Is there any aerial that can be placed inside the car? something better then the current japanise one sticked to the back window.
Also, I will ask him to create a bonnet scoope just like the ones in the wiper. What do you guys think of this? is it possible first of all?
Posted: Fri Dec 09, 2005 6:42 am
Is that place in preston on plenty road? Its on a corner think grey in colour?? Heading city way its on the right?mxysxy wrote:Some good news guys;
Her insurance company called me and asked me to get 2 quotes and fax it to them. Also they gave me a claim number.
I took the car to the place in Preston. Have to admit this place looks professional and a big shop. There were about 8 people working an the cars, and most of the cars were Jap.
I have explained the situation to him, that I need to get a quote to fix the car, to be paid by insurance company.
He seemed very confident and capable of doing the work.
Same place quoted me $3,500 to respray my whole car, when the car was keyed in every panel.
Also explained that I have a spare bumper coming and need the whole car respray professionally (No Masking!) to a lighter silver colour.
He has quoted me $1,500 to respray everything and fixing up all the small dints and bits, on top of whatever he will get from insurance company.
I believe this is an excellent outcome on my side, as the damage will be fixed, car will fully respray and all the extra body kit will be installed (bumper, side skirts, and back).
So, he will talk with the insurance company today and give me a call this afternoon.
Hope that everything will go smoothly.
Posted: Fri Dec 09, 2005 10:00 am
yeppayaya wrote:Is that place in preston on plenty road? Its on a corner think grey in colour?? Heading city way its on the right?
Posted: Fri Dec 09, 2005 10:33 am
mxysxy - have to wait another week to get back my car coz they're waiting on SUSPENSION parts. sounds bad..... was your's purely cosmetic damage only?
i want my car back... can't stand driving my sister's pulsar any longer.
i want my car back... can't stand driving my sister's pulsar any longer.
Posted: Fri Dec 09, 2005 11:56 am
Yep,
Front right side panel was gone, also minor skirt damage,
Damage has been fixed, however, waiting for the kit to arrive.
These guys have been very good to me, I have seen their work, very high quality.
Also, they love to work with import cars.
Front right side panel was gone, also minor skirt damage,
Damage has been fixed, however, waiting for the kit to arrive.
These guys have been very good to me, I have seen their work, very high quality.
Also, they love to work with import cars.
Posted: Fri Dec 09, 2005 2:11 pm
max u can get a vent like that made on your standard one for sure. or u can wait for a cf one which im working on atm. will take some time but get a groupie up and running next year for sure 
Posted: Fri Dec 23, 2005 11:14 am
I went to see the car today, and really impressed with the work has done,
All scratches has been filled, car has stripped of totaly to frame, panels sanded back, spoiler has been removed and gaps filled, boot key and aerial holes has been filled.
Looks great, they will prime it soon.
All scratches has been filled, car has stripped of totaly to frame, panels sanded back, spoiler has been removed and gaps filled, boot key and aerial holes has been filled.
Looks great, they will prime it soon.
Posted: Thu Jan 12, 2006 3:31 pm
mxysxy - how's your car doing?
I got mine back on the 23rd with new panels, new front bar, new headlight, new foglight, new steering rack and new suspension arms etc.
drove it around and was impressed... body looked sweet and front bar was all nicely painted (no scratches at the bottom! woohoo).
1 week later (before new year's), gf borrowed the car and guess what... she drove up her driveway and hit the car on the passenger side corner on her brick postbox/fence.
what-the....
this car is cursed. panel damage looks almost the same. definitely not as bad as before though. car will be back in 2 weeks time. grrrr.... i've probably driven this car for 4 weeks in the last 5 months.
I got mine back on the 23rd with new panels, new front bar, new headlight, new foglight, new steering rack and new suspension arms etc.
drove it around and was impressed... body looked sweet and front bar was all nicely painted (no scratches at the bottom! woohoo).
1 week later (before new year's), gf borrowed the car and guess what... she drove up her driveway and hit the car on the passenger side corner on her brick postbox/fence.
what-the....
this car is cursed. panel damage looks almost the same. definitely not as bad as before though. car will be back in 2 weeks time. grrrr.... i've probably driven this car for 4 weeks in the last 5 months.
Posted: Thu Jan 12, 2006 3:38 pm
That, my good man, is why no one but me drives the car.
Posted: Thu Jan 12, 2006 3:52 pm
My god, I would be really pissed off to my gf if she does such a think,
and I wouldnt accept any sexual favours in return.
My car is still in the shop, sitting there in the corner, waiting for the bodykit to arrive.
Bloody kit is still in ship, due to arrive end of Jan
All the damage has been fixed, they have filled up all the previous scrathes and sanded back, due for priming end of next week I think.
My best assumption is to get the car back mid Feb.
I also decided not to go through with bonnet vents.
Thinking now that everytime it rains, I will be stressed out.
The temp under bonnet never been a problem anyways and I have a great proven CAI, plus the new front bumper should allow so much more air going in.
and I wouldnt accept any sexual favours in return.
My car is still in the shop, sitting there in the corner, waiting for the bodykit to arrive.
Bloody kit is still in ship, due to arrive end of Jan
All the damage has been fixed, they have filled up all the previous scrathes and sanded back, due for priming end of next week I think.
My best assumption is to get the car back mid Feb.
I also decided not to go through with bonnet vents.
Thinking now that everytime it rains, I will be stressed out.
The temp under bonnet never been a problem anyways and I have a great proven CAI, plus the new front bumper should allow so much more air going in.
Posted: Thu Jan 12, 2006 4:01 pm
hahaha.... she felt heaps bad coz she knows how much i love my cars... she was full crying and waited a whole day before she told me (i was out the whole day).
oh well.... at least it's worth the wait. just don't lend your car to ANYBODY when it's all done. both times i've let somebody else drive it and both times it's been damaged.
oh well.... at least it's worth the wait. just don't lend your car to ANYBODY when it's all done. both times i've let somebody else drive it and both times it's been damaged.
Posted: Wed Feb 01, 2006 8:56 pm
I cant wait...
I saw the car all primed up and sealed yesterday.
Still waiting for the bodykit to clear of the customs.
I have a question though.
I will ask the shop to paint few interior panels with the same paint as well, while doing exterior.
Now, have a look the photo below and imagine every panel white is silver. Forget about the seat covers, roof, and the steering wheel.
Do you think it would be too much silver inside?
I will have black & grey seat covers with grey FTO logo on it.
Also, how do I remove the panels circuled in red?
I saw the car all primed up and sealed yesterday.
Still waiting for the bodykit to clear of the customs.
I have a question though.
I will ask the shop to paint few interior panels with the same paint as well, while doing exterior.
Now, have a look the photo below and imagine every panel white is silver. Forget about the seat covers, roof, and the steering wheel.
Do you think it would be too much silver inside?
I will have black & grey seat covers with grey FTO logo on it.
Also, how do I remove the panels circuled in red?
Posted: Thu Feb 02, 2006 12:12 pm
any answers?
Posted: Thu Feb 02, 2006 12:45 pm
They just snap out mate. The cup holder just needs a good pull, the gear surround (Im not 100% having a manual myself) but I have to pull the console surround out & unscrew it from underneath. For tips it may just pop out...
Posted: Thu Feb 02, 2006 12:59 pm
That tiptronic panel needs to be unscrewed from underneath, can't imagine it's too hard as you need to remove it to do the + - swap on the tip controls.
Posted: Thu Feb 02, 2006 1:27 pm
GreatBuCkEt wrote:That tiptronic panel needs to be unscrewed from underneath, can't imagine it's too hard as you need to remove it to do the + - swap on the tip controls.
!http://www.funky-fto.co.uk/gears.html
I didn't understand this hook part. It is hard to imagine now, as I don't have the car in front of me.You next need to remove the gear stick. The button on top is fixed by two hooks. Push these hooks and remove the shift button.
Do I have to push the button first then I will see the hooks?
Also, to remove the cup holder in the middle; do I have to push it up from underneath or use a screwdriver to lever it up?