Posted: Thu Jul 01, 2004 7:46 pm
OK guys, got info on the recall
Recall notification number 1122
Recall notification day June 18, Heisei 16
Recall opening day June 19, Heisei 16
It effects vehcles with Chassis number between DE3A-0000025 and DE3A-0013017 and production dates Oct/03/1994～Oct/31/1995 for the GPX and GR.
AND VEHICLES BETWEEN DE2A-0000008～DE2A-0001566 ,PRODUCTION DATES Oct/13/1994～March/03/1995.
Please read below for my contacts translation of the recall.
About the electric wiring harness of the FTO engine room, and also the electric wiring harness of the glove box of FTO
The situation and its cause of the structure, that is in a standard incongruent state, equipment, or a performance.
1) There is what has the unsuitable fixed method of the electric wiring harness routing for vehicle speed sensors in the engine room, and the electric wiring harness routing for idol number-of-rotation speed control devices. The electric wiring harness is pulled by the rotation of the engine under driving operation. Therefore, when the worst, wiring is disconnected and there is a possibility of mull functions of speedometer function, or an uncontrollable in keeping the proper engine idol number-of-rotation speed.
2) There is what has narrow clearance of the electric wiring harness of the between the glove box attachment brackets. The electric wiring harness and the bracket concerned may interfere by the vibration under driving operation, and the covering of electric wiring harness may be damaged. Therefore, when the worst, wiring short-circuits, a fuse goes out and there is a possibility that wiper operating or engine starting operation may become impossible.
The contents of an improvement measure
(1) Change the fixed position of the wiring harness in all vehicles and an engine room.
(2) Apply a masking tape on all vehicles and a glove box attachment bracket terminal.
In addition, wiring is checked, when (1) and (2) are damaged, if the condition is fixable,
correct harness and routing corrects, if the condition is uncorrectable, exchange them for
a new replacement parts.
I am waiting on my contact to give me a web address which contains pictures of the fault.
If you need more info just reply your question to this thread and i will pass it on.
Recall notification number 1122
Recall notification day June 18, Heisei 16
Recall opening day June 19, Heisei 16
It effects vehcles with Chassis number between DE3A-0000025 and DE3A-0013017 and production dates Oct/03/1994～Oct/31/1995 for the GPX and GR.
AND VEHICLES BETWEEN DE2A-0000008～DE2A-0001566 ,PRODUCTION DATES Oct/13/1994～March/03/1995.
Please read below for my contacts translation of the recall.
About the electric wiring harness of the FTO engine room, and also the electric wiring harness of the glove box of FTO
The situation and its cause of the structure, that is in a standard incongruent state, equipment, or a performance.
1) There is what has the unsuitable fixed method of the electric wiring harness routing for vehicle speed sensors in the engine room, and the electric wiring harness routing for idol number-of-rotation speed control devices. The electric wiring harness is pulled by the rotation of the engine under driving operation. Therefore, when the worst, wiring is disconnected and there is a possibility of mull functions of speedometer function, or an uncontrollable in keeping the proper engine idol number-of-rotation speed.
2) There is what has narrow clearance of the electric wiring harness of the between the glove box attachment brackets. The electric wiring harness and the bracket concerned may interfere by the vibration under driving operation, and the covering of electric wiring harness may be damaged. Therefore, when the worst, wiring short-circuits, a fuse goes out and there is a possibility that wiper operating or engine starting operation may become impossible.
The contents of an improvement measure
(1) Change the fixed position of the wiring harness in all vehicles and an engine room.
(2) Apply a masking tape on all vehicles and a glove box attachment bracket terminal.
In addition, wiring is checked, when (1) and (2) are damaged, if the condition is fixable,
correct harness and routing corrects, if the condition is uncorrectable, exchange them for
a new replacement parts.
I am waiting on my contact to give me a web address which contains pictures of the fault.
If you need more info just reply your question to this thread and i will pass it on.
