Group Buy: New KMC EL Dials
Moderators: IMC, Club Staff
- Grue
- Veteran Mechanic
- Posts: 876
- jedwabna poszewka promocja
- Joined: Fri Sep 17, 2004 5:00 pm
- Location: Taranaki, New Zealand.
- Contact:
- robsta
- Veteran Mechanic
- Posts: 897
- Joined: Tue Aug 30, 2005 5:00 pm
- Location: Morayfield, QLD
1. dstocks - Manual
2. Grue - Manual
3. rock_it (?)
4. silverphoenix
5. dB - Tip
6. eThix - tip
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. Robsta - Manual
15.
do these come with instructions for installation?
also any chance of getting the needle cups and rings included in this buy?
2. Grue - Manual
3. rock_it (?)
4. silverphoenix
5. dB - Tip
6. eThix - tip
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. Robsta - Manual
15.
do these come with instructions for installation?
also any chance of getting the needle cups and rings included in this buy?

-
- Veteran Mechanic
- Posts: 1046
- Joined: Mon Feb 12, 2007 6:00 pm
- Location: Brisbane
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
-
- Mechanic
- Posts: 532
- Joined: Fri Feb 04, 2005 6:00 pm
- Location: Western Sydney
- Contact:
- kmc
- Approved FTO Australia Trader
- Posts: 58
- Joined: Sun Feb 15, 2004 6:00 pm
- Location: UK
- Contact:
EL dials will come with fitting instructions. As to the connectors these are as standard ie same as previous el dials.
As to other items please contact bennoz for these as i cannot start GB or edit them. I don't have a problem if you wish to purchase other items, but it would also effect postage cost.
thanks
As to other items please contact bennoz for these as i cannot start GB or edit them. I don't have a problem if you wish to purchase other items, but it would also effect postage cost.
thanks
KMC
check out new dials on www.kmc-dials.com
check out new dials on www.kmc-dials.com
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
So do you confirm the connectors will fit thorugh the globe holders. I'm not cutting mine like I did with another set.kmc wrote:EL dials will come with fitting instructions. As to the connectors these are as standard ie same as previous el dials.
As to other items please contact bennoz for these as i cannot start GB or edit them. I don't have a problem if you wish to purchase other items, but it would also effect postage cost.
thanks
- jakey106
- Mechanic
- Posts: 687
- Joined: Mon Jul 17, 2006 5:00 pm
- Location: Canberra ACT
- kmc
- Approved FTO Australia Trader
- Posts: 58
- Joined: Sun Feb 15, 2004 6:00 pm
- Location: UK
- Contact:
sorry I cannot confirm that. I admit they were tight but i managed to squeeze it through.khunjeng wrote:So do you confirm the connectors will fit thorugh the globe holders. I'm not cutting mine like I did with another set.kmc wrote:EL dials will come with fitting instructions. As to the connectors these are as standard ie same as previous el dials.
As to other items please contact bennoz for these as i cannot start GB or edit them. I don't have a problem if you wish to purchase other items, but it would also effect postage cost.
thanks
KMC
check out new dials on www.kmc-dials.com
check out new dials on www.kmc-dials.com
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- khunjeng
- Oldtimer
- Posts: 4455
- Joined: Mon Oct 24, 2005 5:00 pm
- Location: Melbourne, Victoria
if you say your done it before with and FTO cluster that will be good enough.kmc wrote:sorry I cannot confirm that. I admit they were tight but i managed to squeeze it through.khunjeng wrote:So do you confirm the connectors will fit thorugh the globe holders. I'm not cutting mine like I did with another set.kmc wrote:EL dials will come with fitting instructions. As to the connectors these are as standard ie same as previous el dials.
As to other items please contact bennoz for these as i cannot start GB or edit them. I don't have a problem if you wish to purchase other items, but it would also effect postage cost.
thanks
- robsta
- Veteran Mechanic
- Posts: 897
- Joined: Tue Aug 30, 2005 5:00 pm
- Location: Morayfield, QLD
-
- Mechanic
- Posts: 532
- Joined: Fri Feb 04, 2005 6:00 pm
- Location: Western Sydney
- Contact:
- zhong
- Apprentice
- Posts: 48
- Joined: Thu Nov 30, 2006 6:00 pm
- Location: Kingsford
- Contact:
- ytq536
- Newbie
- Posts: 12
- Joined: Tue May 18, 2004 5:00 pm
- Location: sydney
Posted: Fri Jul 06, 2007 8:54 pm Post subject:
--------------------------------------------------------------------------------
1. dstocks - Manual
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5.
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - Tip 4 spd
--------------------------------------------------------------------------------
1. dstocks - Manual
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5.
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - Tip 4 spd
- kmc
- Approved FTO Australia Trader
- Posts: 58
- Joined: Sun Feb 15, 2004 6:00 pm
- Location: UK
- Contact:
1. dstocks - Manual
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5. zhong - Manual
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - tip 4 spd
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5. zhong - Manual
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - tip 4 spd
KMC
check out new dials on www.kmc-dials.com
check out new dials on www.kmc-dials.com
- Shahrez
- Mechanic
- Posts: 433
- Joined: Sat Jun 16, 2007 5:00 pm
- Location: Perth, WA
- Contact:
1. dstocks - Manual
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5. zhong - Manual
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - tip 4 spd
16. Shahrez - Manual
_________________
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5. zhong - Manual
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. SG - Manual
12. RallyMad - Manual
13. dj_ules - Manual
14. jakey106 - Tip 4 spd
15. ytq536 - tip 4 spd
16. Shahrez - Manual
_________________
- mr-charisma
- Oldtimer
- Posts: 4020
- Joined: Wed Jul 06, 2005 5:00 pm
- Location: Brisbane, Australia
- SG
- Veteran Mechanic
- Posts: 833
- Joined: Thu Mar 10, 2005 6:00 pm
- Location: Perth
going with a different look
Shahrez wrote:1. dstocks - Manual
2. Grue - Manual
3. rock_it - Manual
4. silverphoenix
5. zhong - Manual
6. eThix - Tip 4 Spd
7. Richy - Tip 4 Spd
8. messy - Manual
9. Rauny
10. JoeJoe - Tip 4 spd
11. RallyMad - Manual
12. dj_ules - Manual
13. jakey106 - Tip 4 spd
14. ytq536 - tip 4 spd
15. Shahrez - Manual
_________________