FTO AUSTRALIA

how we wish we have a hoist in our garage.....

$2500 i believe you can pick one up for.

haha, yeah but you need a high ceiling too

I know i may get shot for this, but go to pedders and get the 14 dollar suspension check. They did it for a different car and showed me what was wrong with it. They also said all other things were wrong and needed fixing though lol, but just pay for the 14 dollar check and see what they say and if they have advise, just DO NOT GET THEM TO DO ANYTHING!!!!!

haha, yeah that's actually a pretty good idea, but get them to show you what's wrong and where, that way you know what needs fixing and can do it yourself

Nah dont go to pedders theyll just say everythings wrong haha.

Totally unrelated rant, i remember calling a brisbane shop and asking how much to swap my springs back to stock height, wanted $400 for an hours work.

silverGPX wrote: Totally unrelated rant, i remember calling a brisbane shop and asking how much to swap my springs back to stock height, wanted $400 for an hours work.

Cheap, should ring Sydney stores. they know how to charge!

I agree with Shane, and woot, take it to pedders, spend the cost of a few happy meals on a sus check and have them actually show you the probs.
DIY the bits and be done with it, that stuff's not hard.

Shane001 wrote:haha, yeah that's actually a pretty good idea, but get them to show you what's wrong and where, that way you know what needs fixing and can do it yourself

Terrible idea...
Already did that, they said i had to buy a completely brand new rear, hubs, arms the works!
Idiots. Forgot to even charge me $14!

Valandis91 wrote:Forgot to even charge me $14!

You people will whinge about anything.

Astron_Boy wrote:

Valandis91 wrote:Forgot to even charge me $14!

You people will whinge about anything.

f**king tasmanians

THEY HAVE ALRRIVED!

Holy sh*t that was fast postage....

Hopefully get them in by next week. Geez they're solid

Check them out!

NICE

Going in tomorrow

That alignment data looks screwed up to me. Going by that pic the rears clearly have more camber than the fronts but the data states the opposite.

0.3 is basically vertical.

payaya wrote:That alignment data looks screwed up to me. Going by that pic the rears clearly have more camber than the fronts but the data states the opposite.

0.3 is basically vertical.

In real life the right hand side is quite vertical and thats the one that is 0.3
the left hand one is -1.8 and you can tell its a lot more cambered...

So must be the pics! Hopefully gets sorted tomorrow

Ah I was looking at the caster! Good luck finding the bent part it's fun.

The arms are in!!! Will be posting pics tonight. They fit perfectly. Guys said they seem like very quality products.

Also made the sway bar one setting stiffer. Waiting for alignment now. Going for shanes set up.
1mm toe in rear
1mm toe out front
About 1.4 camber all round.

Also found out my brake pads need replacing. Meh

Good work!

Valandis91 wrote:Also found out my brake pads need replacing. Meh

Lawso them.