Page 2 of 2
Re: Sputtering startup
Posted: Fri Aug 08, 2014 9:27 pm
by -Nighthawk-
Yeah you want to hope it's not completely stuck like my one was. 4 different people tried with no luck haha
And I want to see Sahin remove it without taking off the plenum :p
Re: Sputtering startup
Posted: Sat Aug 09, 2014 12:22 am
by Daniel2019
Soft c**nts
Re: Sputtering startup
Posted: Sat Aug 09, 2014 12:29 am
by Vectose
Daniel2019 wrote:Soft c**nts
^This
Re: Sputtering startup
Posted: Sat Aug 09, 2014 8:29 am
by Bennoz
Vectose wrote:Daniel2019 wrote:Soft c**nts
^This
+1
Re: Sputtering startup
Posted: Sat Aug 09, 2014 8:31 am
by c0n13oX
Well it hasnt done it since I first posted this so im stumped
Re: Sputtering startup
Posted: Sat Aug 09, 2014 10:02 am
by silverGPX
I can do fuel filter in 10 mins
Re: Sputtering startup
Posted: Sat Aug 09, 2014 10:41 am
by SchumieFan
Yeah I have sputtering problems on startup... put a bottle of injector cleaner through and it fixed it for about 5 tanks of fuel and then it comes back...
Did u just volunteer to change my fuel filter Matt?
Re: Sputtering startup
Posted: Sat Aug 09, 2014 10:48 am
by PHIL069
SchumieFan wrote:Yeah I have sputtering problems on startup... put a bottle of injector cleaner through and it fixed it for about 5 tanks of fuel and then it comes back...
Did u just volunteer to change my fuel filter Matt?
Your injectors might need a proper clean out with an ultrasonic cleaner.
like this...
http://www.ebay.com.au/itm/2L-Stainless ... 5667764d77
Thats how the pro's clean them out.
Re: Sputtering startup
Posted: Sat Aug 09, 2014 1:07 pm
by bjk
Ebay ad wrote:Note: During cleaning, the“ZiZi” noise is normal.
Re: Sputtering startup
Posted: Sat Aug 09, 2014 1:41 pm
by Technikhaus
Ebay ad wrote:The following vedio will show you how to use the machine!
Re: Sputtering startup
Posted: Sat Aug 09, 2014 2:18 pm
by Sahin
Might just shove the 560cc injectors in lol
Re: Sputtering startup
Posted: Sat Aug 09, 2014 3:57 pm
by rock_it
Never experienced that problem.. But I did bench clean the injectors..
Re: Sputtering startup
Posted: Sun Aug 10, 2014 9:22 am
by Bennoz
Sahin wrote:Might just shove the 560cc injectors in lol
Unless you have some way of adding 30% to the base fueling, she wont start.
Re: Sputtering startup
Posted: Sun Aug 10, 2014 11:52 am
by Sahin
I was kidding lol