Page 2 of 2
Re: Melbourne people
Posted: Sat Aug 03, 2013 12:52 pm
by payaya
-Nighthawk- wrote:Hmm if Payaya doesn't have a similar tool I can use I might pay to borrow that off you if that's cool
Edit: actually it's just a ground down socket. I'll attempt to make one myself
You can get a 3/8th socket with tool onto the tensdioner nut, well I can anyway!
Re: Melbourne people
Posted: Sat Aug 03, 2013 1:25 pm
by Vectose
payaya wrote:-Nighthawk- wrote:Hmm if Payaya doesn't have a similar tool I can use I might pay to borrow that off you if that's cool
Edit: actually it's just a ground down socket. I'll attempt to make one myself
You can get a 3/8th socket with tool onto the tensdioner nut, well I can anyway!
+1 That's how I did mine. I guess it just depends on the size of the socket/wrench you have.
Re: Melbourne people
Posted: Sat Aug 03, 2013 2:10 pm
by -Nighthawk-
Yeah tried a 3/8 socket, it went on but wouldn't budge (we tried an extension on the top but that didn't help)
Re: Melbourne people
Posted: Mon Aug 05, 2013 12:22 pm
by payaya
Are the tools you using slipping off the nut when you are trying to loosen? If so you most likely have rounded off the nut. But if its a case of just being too tight the nut should be still good.
PM me I may be able to meet up with ya ans loosen the nut off for ya.
Re: Melbourne people
Posted: Mon Aug 05, 2013 4:41 pm
by -Nighthawk-
We are having an FTO DIY Day this weekend in Melbourne. If you're interested in coming please post in this thread:
http://ftoaustralia.com/v3/viewtopic.php?f=6&t=28266