Page 2 of 3
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 4:24 pm
by jwa
I am after the Water Pump
would you be able to post it to perth,wa and how much it would be, thanks
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 8:16 pm
by Valandis91
the mivec controller....
does it come with instructions for installation???
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 9:47 pm
by Shane001
What have you removed the emanage? Just use it to control Mivec.
I really have to pull my finger out and get mine working lol!
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 10:16 pm
by Valandis91
there is no way my car would run without the emanage.... im going to play around with the mivec point because of the cams.
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 10:49 pm
by Shane001
Yeah but do it with the emanage. Didn't I send you the settings for this ages ago?
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 11:02 pm
by Valandis91
to change mivec point?
not sure dont think so....
i didnt think you could do it with the emanage....
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 11:04 pm
by Shane001
Yeah u can
Check u're emails, I'm sure I sent you instructions for this.
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Tue Nov 02, 2010 11:50 pm
by Kustom
What brand is the cat?
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Wed Nov 03, 2010 12:20 am
by mr-charisma
Zetti
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Wed Nov 03, 2010 7:55 am
by mr-charisma
Valandis91 wrote:the mivec controller....
does it come with instructions for installation???
An installer would be able to put this in for less than $100
On a normal FTO it's best to leave the Mivec activation point more or less where it is - Mitsubishi has tuned it to the best possible RPM range.. The Mivec /AFC unit will give control over the Air / fuel tuning settings without the expense & tuning costs of a full blown ECU
On your car with the engine Conversion mods etc - Can't say for sure .. if you haven't had your car professionally tuned yet it would be best for them to look at playing with the Mivec point at the same time, using the Haltech as Shane said
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Wed Nov 03, 2010 7:57 am
by mr-charisma
I'll try to respond to everyone's PM's etc & will be posting off some sold items today..
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Thu Nov 04, 2010 11:28 am
by mr-charisma
Fuel Pressure reg is sold
EL Dials Sold
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Thu Nov 04, 2010 1:55 pm
by chr15j4m35
PM sent
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Thu Nov 04, 2010 2:27 pm
by silverGPX
What would setting the mivec to engage at idle. wouldnt it sound mean.
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Thu Nov 04, 2010 10:06 pm
by brad_gpx
MPH?
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Fri Nov 05, 2010 5:56 am
by spency
very interested in water pump!
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Fri Nov 05, 2010 3:28 pm
by fgjoh
PM Sent re mivec controller
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Fri Nov 05, 2010 7:15 pm
by mr-charisma
Water pump sold pending payment
Intake Pipe sold
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Sat Nov 06, 2010 10:36 am
by bushido
Ah my old exhaust! It was awesome when I had it.
Very quiet and gave a strong mid range!.
Best of luck Michael!
Re: GARAGE CLEANOUT - Loads of Aftermarket gear
Posted: Wed Nov 10, 2010 8:16 pm
by millsy
give you $250 for the unichip? does it require a flash by tuners or any installation by anyone? or could i do it myself?