Page 2 of 2

Posted: Mon Sep 01, 2008 5:35 pm
by Bennoz
Its on an exchange basis thou.

Posted: Mon Sep 01, 2008 5:37 pm
by I8A4RE
Bennoz wrote:Its on an exchange basis thou.
thats if you want your 100 bucks back lol

Posted: Sun Sep 07, 2008 1:31 am
by maggsy
i never got around to sending mine stock one back......couldn't find a box to pack it in. now its collecting dust in the garage. :?

Posted: Sun Sep 07, 2008 2:03 am
by Shahrez
thank god RPW are just 15 min from my house! easy to get up there and check there stuff out, especially the TT magna! :twisted:

Posted: Mon Oct 06, 2008 11:44 am
by RallyMad
Bennoz wrote:A big aluminium block that raises the pivot point of the stick under the leather boot will tell you.
so could some one tell me if this is what Ben is talking about or is this just the stock changer

Image

Image

Posted: Mon Oct 06, 2008 2:07 pm
by Bennoz
Doesn't look like it - where those 3 bolts hold the assembly down, under it, there should be a thick aluminium sandwich plate. See kit pic below:

Image
Image

Posted: Mon Oct 06, 2008 4:58 pm
by RallyMad
Fair enough, was just wishful thinking then :roll: :lol:

Thanks Ben. Just didn't know what you meant by your previous discreption.

Posted: Mon Oct 06, 2008 5:27 pm
by Bennoz
:lol:

No worries. Another give-away, is the 3 bolts that hold the assembly down. as you can see in the kit pictured above, you get 3 longer bolts to use, they are an Alley key head as opposed to the factory 14mm socket type ;)

Posted: Tue Oct 14, 2008 1:40 am
by KJ_bob
I8A4RE wrote:
nvr2low wrote: hey guys don't rpw make a short shifter for the fto or are they the wrong type
yes they do maggsy brought one 6 months ago
What did you think of it, good?

Did you have to get it shipped from perth?