FTO AUSTRALIA

Really? I always crank around by hand first to double check all cams and crank markings line up........
Of course belt is still on at this stage

vipfto wrote:Really? I always crank around by hand first to double check all cams and crank markings line up........
Of course belt is still on at this stage

Ahh with belt on, thats ok

Bennoz wrote:

vipfto wrote:Really? I always crank around by hand first to double check all cams and crank markings line up........
Of course belt is still on at this stage

Ahh with belt on, thats ok

You friggan NOOB, of course with the belt on . You dont move the engine in the slightest with the belt off

still waiting on my parts from camskill

I8A4RE wrote:

Bennoz wrote:

vipfto wrote:Really? I always crank around by hand first to double check all cams and crank markings line up........
Of course belt is still on at this stage

Ahh with belt on, thats ok

You friggan NOOB, of course with the belt on . You dont move the engine in the slightest with the belt off

And how many timing belts have you changed Simon? n00b me, ya mungrel

Lol

FTO timing belts = 0
Mitsi timiing belts = 1
Nissan timing belts = 6 - 10

Just for the record lol

Hey Jono,

Would really appreciate it if you could post pictures of the timing belt change.

Even better...DIY timing belt guide

...pretty sure there are many members out there due for a major service soon and a DIY guide would assist heaps & save $$$!

Yeah i think jono will be planning on it..... he is the DIY king

Amen to that!

JOeJOe wrote:

jonowong wrote:ok im going to buy these things

Banjo Alternator Belt 4PK0940 $29
Banjo P/S & Aircon Belt 6PK1080 $39
Gates Timing Belt T987 $139

but do i need a new tensioner and idler? because they're like $200 each

I got my p/s and alt belt, both for around $30

Timing belt was $119.

Asian auto shop in Canley Vale.

Hey can u please tell me where abouts in canley vale? wats the name of the shop?

Opposite the bread shop where the car park is. On the same side as Blue Heavan ice cream place.

Jono is your gpx or gr

I8A4RE wrote:Jono is your gpx or gr

hehe Simon is yours GPX or GR? I thought GPX.. but your sig says different..

mr-charisma wrote:

I8A4RE wrote:Jono is your gpx or gr

hehe Simon is yours GPX or GR? I thought GPX.. but your sig says different..

no his is a GR, actually before he painted mine, it was exactly the same as mine, GR, auto, 94, red (but he had more scratches on his lol)

hey guys i'm planning on do this as well, so... can someone some up exactly what is needed, please?
and whats with the massive difference in prices for the parts? are there any difference or is it just mark up ?
btw sry for the noob requests.... but... meh i'm a NooB lol

gpx

Jono... hows the whole process going man? Still waiting for ya parts?

Yang i would also like to know what belt is for the GR.

So basically your looking at
Timing belt (gates t987mivec) (gr ????)
1 X timing belt tensioner pulley
1 X timing belt idler pulley
1 x water pump

Now aparently theres only only two pulleys but in every pic i have found there is three. I would really like to confirm this..... anyone?

Then theres also the p/s and a/c belt but only need to replace if necessary (cracked and sh*t).

Now if you are doing, i would highly recommending replacing the seals as well.

Simon, about the water pump...are the kempy ones available in aus? like is there store that sells them or does it have to be ordered directly from NZ and how much? 120aud?

thanks paul

Ive contacted them via their contact form but no reply as of yet, they are usually pretty busy apparently but ill call them on Monday if i dont get reply

Its all good man. I have also contacted them via the form. I wonder if there is enough members for a group buy on the kempy's water pump.

hmmm..