Page 2 of 2
Posted: Fri Feb 29, 2008 8:22 pm
by I8A4RE
Posted: Fri Feb 29, 2008 10:54 pm
by payaya
dstocks wrote:OK was clicking on the wrong PNC in Caps. Is this better:
MD614568 Servo Kit, throttle body
MD628054 Servo Kit, throttle body
MD628056 Servo Kit, throttle body
So which one for a 95 model GR V6?
I went on Camskill:
http://www.camskill.co.uk/products.php?plid=m3b11s9p362. It states the FTO with the following part numbers, its invisible so ya gotta do a text search.
Lists these three:
ADC47430 MD614568 MD628054
Go to the EVO 2-3 it lists part numbers:
ADC47430 FTO MD614568 FTO MD628054 EVO MD614368 EVO MD628051
So that means they both share:
MD614568 FTO MD628054
Which means they are the same????
Now on ebay:
http://cgi.ebay.com.au/IDLE-SPEED-AIR-C ... m153.l1262
$90 bucks?????????
Posted: Sat Mar 01, 2008 9:38 pm
by Tbone
Hi, the Mitsubishi guy said he was trying to get a stepper motor from Repco for me but he wasn't sure if it was the right fit for and FTO.
Does anyone know if you can get FTO stepper motors from Repco or any other distributor?
My car is a 95 GPX - any ideas of part numbers? Is the stepper motor in this car the same as any other Mitsubishi?
This motor is frustrating the hell outta me over here!
Posted: Sun Mar 02, 2008 8:19 am
by dstocks
the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.
Posted: Thu Mar 06, 2008 10:04 pm
by payaya
dstocks wrote:the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.
Hey mate so its MD6147635 or MD614736??
Not the ones I mentioned above?
Thanks
Posted: Thu Mar 06, 2008 10:23 pm
by dstocks
I did get a price back on these, and its better than the Mitsi Aust price by quite a bit, but it isnt as good as the Ebay price. Having said that, the part number is wrong, but I guess if it fits and works, that doesnt really matter.
Posted: Fri Mar 07, 2008 6:35 pm
by payaya
payaya wrote:dstocks wrote:the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.
Hey mate so its MD6147635 or MD614736??
Not the ones I mentioned above?
Thanks
MD6147635 is a TPS according to the Ebay guy.
Posted: Tue Mar 11, 2008 6:42 pm
by Tbone
Hi guys,
I can get myself a stepper motor with a md 614568 serial number from a 95 FTO for $165.
Can any one tell me if this is the right motor for a GPX - I'm not sure if its a GR model or if there is even a difference between the motors????
Help?
Thanks, Tbone
Posted: Fri Mar 14, 2008 2:10 pm
by tenji
well the fto i got does the same thing and idles at 300-500rpm but doesnt stall
stepper motor has been changed and still does it...
Posted: Fri Mar 14, 2008 4:13 pm
by I8A4RE
I thought the idle speed is adjustable? Via the idle speed adjustment screw
Posted: Sat Mar 15, 2008 3:07 pm
by nontoxic
Hi, here in NZ we have a dismantler called Kempys Bitza Mitsi's - they do exchange recon steppers worldwide. GIve them a call or the net on
http://www.kempys.co.nz/ they know what they're talking about and are a great help.
Posted: Sat Mar 15, 2008 5:36 pm
by I8A4RE
nontoxic wrote:Hi, here in NZ we have a dismantler called Kempys Bitza Mitsi's - they do exchange recon steppers worldwide. GIve them a call or the net on
http://www.kempys.co.nz/ they know what they're talking about and are a great help.
Cheers mate most of us are all aware of kempys and have even brought products of them
But thanks anyway
Posted: Sun Mar 16, 2008 12:02 am
by tenji
I8AFRE wrote:I thought the idle speed is adjustable? Via the idle speed adjustment screw
i am going to try it as soon as i get back to melb next week currently in sydney atm
Posted: Thu Mar 20, 2008 12:50 pm
by robsta
I just bought a new stepper motor from Nardek, shipped it up over night to me. I'm going to put it on tonight
It's a genuine Mitsubishi part
Nardek part number 510-16 $125 inc shipping seems like a good price to me
Posted: Thu Mar 20, 2008 1:21 pm
by dstocks
Thats not a bad price at all if its genuine
Posted: Fri Apr 04, 2008 2:30 am
by payaya
robsta wrote:I just bought a new stepper motor from Nardek, shipped it up over night to me. I'm going to put it on tonight
It's a genuine Mitsubishi part
Nardek part number 510-16 $125 inc shipping seems like a good price to me
Thats what they quoted me! Does it work?
Posted: Sat May 03, 2008 4:43 pm
by I8A4RE
Rob how did you go with this fitted alright??? Yours is mivec yeah???
Posted: Tue May 06, 2008 3:57 pm
by Shahrez
Posted: Tue May 06, 2008 8:24 pm
by Shahrez
by the way, i contacted Nardek.com.au for a quote and this was their reply
510-16 cost is AU$195.00 includes postage.
510-16 is for FTO's and are new genuine Mitsubishi part
hence previously someone mentioned that it cost $125 including postage! and iam in perth, iam sure it doesnt cost an extra $75 to post down here!
Posted: Thu May 08, 2008 11:36 am
by ftokiwi
has anyone got the link to the diy page for fixing the stepper motor?