FTO AUSTRALIA

Posted: **Mon Sep 03, 2007 8:41 pm**

MissxFTO wrote: LOL!!
he just read that when i did.. so funny the face was priceless!!

Hehe, how many four letter words did he call me?

Posted: **Tue Sep 04, 2007 9:11 pm**

Hey, I used the onlne form when I signed on for Autosalon, but cause I was in such a rush to get it in I didn't notice that I didn't get to fill out a form that says what mods I've got & all that...

What do the points actually mean? Do we add up all our Club Points to see who wins a prize?
I won't have many points atm, might get 1 for the rims though, lol ... should I fill out a form & send it in?

Posted: **Tue Sep 04, 2007 9:24 pm**

alisa will contact you, if not contact her she will ask for details & photos !!

Posted: **Thu Sep 06, 2007 6:43 pm**

Yay my account finally active now. Okay now when I come around and the promo girls are making love to your cars while I shoot, come say hi to me ( I do bite FYI ). I have already dedicated a whole memory card for your cars, if you have a shot you would like don't be afraid to tell me else I'll roam free and molest your cars with my camera .

Posted: **Thu Sep 06, 2007 6:56 pm**

lol @ molest.. i know my car loves it

Posted: **Thu Sep 06, 2007 10:31 pm**

Bamas wrote:Yay my account finally active now. Okay now when I come around and the promo girls are making love to your cars while I shoot....

um... are you going to take photos too?

Posted: **Thu Sep 06, 2007 11:30 pm**

Hehe, If you're taking pics of my car I hope you can photoshop

Come & introduce yourself on the day

Posted: **Sun Sep 09, 2007 5:05 pm**

BorepYano wrote:
I8AFRE wrote:
umm does anyone know of a good motel? somewhere close to where the show is and even closer to a pub

well... ben did mention that he has a king size bed in his hotel room lol

but if u dont want to shack up with him... how much u looking at spending? and for how many nights?

I'll let you rent it off me by the hour

Nah i cant afford the $2 p/h but thanks anyway ben

. what motel r u stayin at though and yang wtf are u bens pimp or something no wonder you got no money jok

Posted: **Tue Sep 11, 2007 3:39 pm**

CRAP!!! Just asked for some info on MAF/MAP sensors from my tuner... no problems there... but i asked him if he had built any FWD cars for AS...

Yep... just pumped out two lasers....

power.... 387hp atw... there goes my dreams of owning the FWD dyno comp...

but christ thats a quick laser

Posted: **Tue Sep 11, 2007 3:54 pm**

lmfa0
AWW poor sam!

least you wont be laughed at!!

Posted: **Tue Sep 11, 2007 5:44 pm**

just up the crank the boost up for the comp and hope for the best sam

haha

Posted: **Tue Sep 11, 2007 7:27 pm**

lol.. im getting the sucker tuned at max boost anyway... Will depend on how much boost the turbo can handle... hoping for over 20psi... engine could handle up to 26-28psi my tuner says but he wont know till we get it on the dyno...

never know... could pull 300kw!!....

unlikely...

hoping for 210kw... over the 200 mark would be sweet... over 230 is very unlikely...

Posted: **Tue Sep 11, 2007 7:38 pm**

Sam quick quesiton with all this power to get 210kw atw how much cash do u need to make it happen?i have a gpx engine btw slightly harder would it be?

Posted: **Tue Sep 11, 2007 7:43 pm**

haha... too much mate...

Im up over $20k so far...

and You'd have to buy a GR engine unless you want to do a bit of pioneering...

if you want 200kw+ then do a 6a13tt conversion... bout $25k and 12 months work but not as complicated...

Posted: **Tue Sep 11, 2007 8:35 pm**

hmmm university bills or 6A13TT conversion thats a tough one.

ios it 25 for the 6A13TT conversion or for what oyur doing now?>

Posted: **Tue Sep 11, 2007 9:18 pm**

25 for the tt

if you make over 240kw sam ill giv RPW 10k the next day ;/

Posted: **Wed Sep 12, 2007 9:08 am**

Lol.. sammi... $10k is not my bill for the conversion...

total is above $20k...

$10k is just the engine...

dont forget, turbo, intercooler, piping, exhaust, ECU, injectors, fuel lines, pump, LSD (yet to get this one), suspension to handle the power, custom built clutch ($1500), labour, tuning, BOV, Wastegate, boost controller, turbo timer, etc..

and $20k is using a pre-built turbo kit... add another $2k if you want to make one from scratch... which you'd have to...

IMO better to just go 6a13tt... wish i'd done that right at the start...

anyway, this is the AS thread... post in the Turbo Section under Sams Turbo Pt 2: Forging Engine to discuss more..

Posted: **Thu Sep 13, 2007 2:09 pm**

ok alisa confirmed me on dyno

boo hoo

Posted: **Thu Sep 13, 2007 2:29 pm**

lol... my engien arrives at JnR on monday... will hopefully be in and running by the next weekend (22nd)... will take the monday and tuesday off... need to do 1000km on the monday to run in the new engine at min psi...

then getting it serviced and give it a REAL dyno run ready for autosalon on the tuesday... **please please dont brake anything..**

its pretty technical how they run it in too... have to use a specific oil... have to have 4 ppl in the car and drive up long hills for 1000km... have to cut power to the fuel pump and crank it over on first start, etc etc...

Posted: **Fri Sep 14, 2007 8:49 am**

Ok,
today i am making up my reader board majigga..
if anyone wants me to make there sheet up let me know.. i have a sweet ass colour printer here @ work

just need to email me what you want on it..

eg.

Things ill need info on.
Engine & Exhaust:
Interior:
Wheels:
Exterior:
I.C.E:

Plus if you want any pics or specific colours let me know.
All you will need to do is get a cheap frame that fits A3 paper size

email: missfto@gmail.com

FTO AUSTRALIA

Autosalon. 29/30th Sept