Page 9 of 49

Re: As seen on Ebay

Posted: Tue Jun 05, 2012 9:33 pm
by Taz
Considering you would pay more for just the stereo console its a steal for those who want that look (or alternatively you can do what i did and spray your existing ones)

And those rims might not look to bad if i spray them - they are cheap enough...might pop round to have a squiz at them me thinks...

Re: As seen on Ebay

Posted: Tue Jun 05, 2012 9:47 pm
by Daniel2019
Taz wrote:Considering you would pay more for just the stereo console its a steal for those who want that look (or alternatively you can do what i did and spray your existing ones)

And those rims might not look to bad if i spray them - they are cheap enough...might pop round to have a squiz at them me thinks...
I dont like the look of regularly sprayed consoles. Ive seen a few and theyve all been pretty crap. Although, I guess if you did it properly it could turn out nice. Do you have any pictures? Im curious to see if your job is better than the ones Ive had a look at.

It is second hand though. Might be fairly brittle and may crack putting it in :lol:

As seen on Ebay

Posted: Tue Jun 05, 2012 9:57 pm
by Sahin
It'd crack during postage me thinks but yeah alright price. but I'd still rather go brand new for a little bit more money for piece of mind lol.

Re: As seen on Ebay

Posted: Tue Jun 05, 2012 9:58 pm
by Daniel2019
Sahin wrote:It'd crack during postage me thinks but yeah alright price. but I'd still rather go brand new for a little bit more money for piece of mind lol.
Yep good call. Without inspection, it could be especially dodgy.

Re: As seen on Ebay

Posted: Tue Jun 05, 2012 10:01 pm
by phi-tec
Fk how is that jdm lol. Some people are jst retarded

Re: As seen on Ebay

Posted: Wed Jun 06, 2012 12:55 pm
by PHIL069
Might help out some of you looking for parts, the boot/wing looks like the one that phunkydude is selling, $50 pick up only, Vic.
http://www.ebay.com.au/itm/1996-Mitsubi ... 41666a0ed7

Re: As seen on Ebay

Posted: Wed Jun 06, 2012 1:23 pm
by PHIL069

Re: As seen on Ebay

Posted: Fri Jun 15, 2012 6:05 pm
by King hit kiz

Re: As seen on Ebay

Posted: Sat Jun 23, 2012 10:50 pm
by zuihoujueding
http://www.ebay.com.au/itm/SUPER-PRO-MI ... 256f4d9c8d

saw this on ebay. price is quite good. But im guessing the installation wil be a nightmare? Are they all press-fit? Meaning its impossible for those who dont have a press machine?

Re: As seen on Ebay

Posted: Sun Jun 24, 2012 1:20 am
by Shane001
zuihoujueding wrote:http://www.ebay.com.au/itm/SUPER-PRO-MI ... 256f4d9c8d

saw this on ebay. price is quite good. But im guessing the installation wil be a nightmare? Are they all press-fit? Meaning its impossible for those who dont have a press machine?
?? They're front sway bar link bushes, no pressing required, and not suitable for an FTO anyway ??

Re: As seen on Ebay

Posted: Sun Jun 24, 2012 9:03 am
by Bennoz
Yep, that's not an FTO bush... for anything. We use droplinks to link the front swaybar.

Re: As seen on Ebay

Posted: Tue Jul 10, 2012 1:43 pm
by ObsidianRadio

Re: As seen on Ebay

Posted: Tue Jul 10, 2012 2:30 pm
by dstocks
Bloody hell, thats ridiculous. The brand new ones ex Japan are around $700 each from memory, so they are trying to make quite a bit on those.....

Re: As seen on Ebay

Posted: Tue Jul 10, 2012 3:17 pm
by fraz91
zuihoujueding wrote:http://www.ebay.com.au/itm/SUPER-PRO-MI ... 256f4d9c8d

saw this on ebay. price is quite good. But im guessing the installation wil be a nightmare? Are they all press-fit? Meaning its impossible for those who dont have a press machine?
Those are for the rear sway bar link-pins according to the SuperPro website. Typical fleabay seller not checking the part numbers against the actual catalogue :roll: :lol:

Not a press-in item, actually quite easy to install. Should take all of about 15mins so long as the nuts haven't seized onto the link-pins ;)

Re: As seen on Ebay

Posted: Tue Jul 10, 2012 3:54 pm
by Bennoz
fraz91 wrote:
zuihoujueding wrote:http://www.ebay.com.au/itm/SUPER-PRO-MI ... 256f4d9c8d

saw this on ebay. price is quite good. But im guessing the installation wil be a nightmare? Are they all press-fit? Meaning its impossible for those who dont have a press machine?
Those are for the rear sway bar link-pins according to the SuperPro website. Typical fleabay seller not checking the part numbers against the actual catalogue :roll: :lol:

Not a press-in item, actually quite easy to install. Should take all of about 15mins so long as the nuts haven't seized onto the link-pins ;)
They're also GR only lol. GPX/vR use droplinks :lol:

As seen on Ebay

Posted: Mon Jul 23, 2012 6:05 am
by ZFL45H1
Saw these this morning on mobile eBay so can't post link just typed mitsubishi Fto and searched high to low spotted these for anyone wanting new springs Image

Re: As seen on Ebay

Posted: Mon Jul 23, 2012 4:15 pm
by ZFL45H1
spotted these today came up a while ago someone wanted some cant remember but i found them again
http://www.ebay.com/itm/MITSUBISHI-6A10 ... 0d&vxp=mtr
im thinking about it

Re: As seen on Ebay

Posted: Mon Jul 23, 2012 6:44 pm
by Taz
:x Cant see the HKS springs anywhere, been waiting for a set of those for quite some time now to pop up somewhere but never seen them.

Shame, would of indefinitely purchased these

Re: As seen on Ebay

Posted: Mon Jul 23, 2012 9:42 pm
by PHIL069
Taz wrote::x Cant see the HKS springs anywhere, been waiting for a set of those for quite some time now to pop up somewhere but never seen them.

Shame, would of indefinitely purchased these
http://www.ebay.com.au/itm/HKS-COIL-SPR ... 231fa28b3a
:D

Re: As seen on Ebay

Posted: Mon Jul 23, 2012 9:55 pm
by Taz
8O
Wtf lmao i searched HKS, FTO, SPRINGS everything but nothing came up :scratch:

Guess ill see if i can afford them tomorrow!

Cheers phil