FTO AUSTRALIA

What are you trying to imply here bennos

wow, thats craptacular!

where's the dyno graph...ben??

Stoopercheap has speco gauges with white faces on sale. Around the 30buck mark for 2inch ones. Thought i'd give you the heads up

Sweet cheers mate

Give us an update!
when do you expect to get some more stuff done?
you should get some defi gauges the black ones that turn green

I dont have a job anymore so all work has been postponed til i find another job.

However in saying that i have found a turbo place that will remove my old waste gate actuator and put on a 5psi one for me. I have also purchased a RRFPR and just need to fit that hopefully this weekend.

I8A4RE wrote:I dont have a job anymore so all work has been postponed til i find another job.

However in saying that i have found a turbo place that will remove my old waste gate actuator and put on a 5psi one for me. I have also purchased a RRFPR and just need to fit that hopefully this weekend.

yallah habib... if you dont have a job you can spend more time on it

Yeah but i cant spend the money that i have for it cause i dont know how long ill be a bum for

you were a bum as soon as you stepped onto australian soil

*chuckles*

Ok project back on, I have 1 week till i start new job so want to get as much done as possible in that time frame.

Found a place that will put on a new actuator on the turbo so ill be taking that there tomorrow.

FPR will be installed as soon as adapter arrives.

Want to get intercooler mounted and all pipe work planned out, cant get turbo mounted till god damm fuel lines are out of the way.

UPDATE: intercooler mounted cost $17 and about 2hrs time. Stil need to do bottom bracket which ill do tomorrow morning




I knows its a sh*tty pic its was getting dark. Ill put up another one tomorrow when im finished

Oh and i gotta get some smaller bolts tomorrow to thats why there is gaps on the top mount

that is one BIG intercooler what PSI are you going to run again as that thing will be good to and above 18-20 psi.
it may be even a little to big for what you want at this time, but then I dont know a lot about that sort of thing so I could be wrong.

but still its looking great

yeah i know, the problem is because of the bozz front bar it would look real sh*t with a tiny one in there also its the only size i could find with the ports on both sides. I have spoken to a turbo guy and he said it should be fine but ill just see how it goes, if it causes to much lag, then ill just get a smaller one. do dramas

even if you keep that as is and get a little side mount one untill you up the turbo when you get the time and cash.

Looks good mate. Plenty of ground clearence too!

Just a thougt. I would be putting end caps on the cooler though so it doent fill up with dust and crap.

Cheers mate, yeah i got some clean clothes blocking the holes while its sitting there.

i want one