FTO AUSTRALIA

Posted: **Wed Oct 01, 2008 2:05 pm**

sublime19 wrote:Unless you guys are starting early, last time it started @ 9am if iirc? Then I'll rock up!

going from the list I think it will be a 9am start if thats ok with Kaz

Posted: **Wed Oct 01, 2008 8:47 pm**

Yep 9:00 am suits me

(that one's for sublime

)

Posted: **Thu Oct 02, 2008 5:25 pm**

kazbah wrote:Yep 9:00 am suits me (that one's for sublime )

haha gotta love it

Posted: **Fri Oct 03, 2008 10:33 pm**

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend tool
jay6 - angel eyes, make headlights alba butt smooth

Posted: **Fri Oct 03, 2008 11:54 pm**

guys where is the place~i wanna take a foot!~need to polish headlights,and install hids may be

Posted: **Mon Oct 06, 2008 11:46 am**

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
sublime19 - dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend tool
jay6 - angel eyes

I'm back in!!!!

Btw what's "take a foot" ?

Posted: **Mon Oct 06, 2008 3:22 pm**

louiszhu wrote:guys where is the place~i wanna take a foot!~need to polish headlights,and install hids may be

Its in Windsor (North West Sydney) I'll pm my address to everyone closer to the day.

Posted: **Mon Oct 06, 2008 4:01 pm**

ill be there,

to bug everybody.

Posted: **Mon Oct 06, 2008 4:03 pm**

SUGAR!!!!

Posted: **Fri Oct 10, 2008 9:21 pm**

nicholas wrote:Steve / anyone else doing CAI...

Can you please give me a shopping list of things to get so that I can do this on the day too?

Bloody good question nick. Im not too sure myself but methinks some some of dunny pipe? I wouild like to run a setup like aza's but instead of the intake pipe from under the front bar, i want to put it through the fog light hole?

Help aza!

What was your shopping list?

Posted: **Sat Oct 11, 2008 9:56 am**

All you need for the front section of the CAI is an off the shelf (Auto One / Repco / Supercheap) length of 75mm automotive grade flexible pipe. They usually come in metre lengths (which is more than enough for the job) and then some cable ties

Posted: **Sat Oct 11, 2008 4:47 pm**

I think what Ben said would be a little cheeper to do.
but I got a 90mm pipe with a 100mm 45degree bend conector pipe that narowed to 90mm to fit in to strait pipe and another 90mm 45 bend to go up into the box.
oh and a metal strap to hold it in place and silicon to make it air tight.

Posted: **Sun Oct 12, 2008 1:54 pm**

R.ighto steve, sounds like we'll do a mini-cruise via supercheap on the day, eh?

Posted: **Sun Oct 12, 2008 2:47 pm**

I'll be coming, i wanna get my calipers painted, my cai boxed and redirected to the outside, so a supercheapauto run may be required on the day.

Posted: **Sun Oct 26, 2008 10:12 pm**

oh..if possible, i would like to change spark plugs to some iridiums as well as new leads, basic service as well.

Posted: **Mon Oct 27, 2008 5:25 pm**

we can add it to the list and see how we go koolio

Posted: **Mon Oct 27, 2008 6:52 pm**

yeah, if time and resources permit, then we'll do the extra stuff but i think its unlikely we'll get it done.

Posted: **Tue Oct 28, 2008 12:27 pm**

koolio1234 wrote:oh..if possible, i would like to change spark plugs to some iridiums as well as new leads, basic service as well.

I think you kinda have the wrong idea about DIY day. It's more for stuff like doing headlights, taillights, other random stuff you won't usually go to a mechanic etc for.

Not for things like getting your car serviced.. go to a mechanic for that.

Posted: **Tue Oct 28, 2008 1:09 pm**

sublime19 wrote:
koolio1234 wrote:oh..if possible, i would like to change spark plugs to some iridiums as well as new leads, basic service as well.
I think you kinda have the wrong idea about DIY day. It's more for stuff like doing headlights, taillights, other random stuff you won't usually go to a mechanic etc for.

Not for things like getting your car serviced.. go to a mechanic for that.

Thats not true at all!

Last DIY day I did a full service, 2 sets of brake pad changes & a set of CV joints! Thats what Im there for

JoeJoe - shocks & springs
Kazbah - shocks (possibly) full car detail by the noobs. Definately need rear engine mounts too
MR2YEN - CAI, engine mounts, plugs, polish headlights
elusi0n - Headlights
sublime19 - dials
xSlurpee - Install HIDS, Install angel eyes, Polish headlights, Install UAS CAI (if available)
gpat - Plugs, service, brake pads
bushido - CAI
poahfto - Angel eyes, Pant brake calipers , Tint my taillights and backpanel, install CAI, sex up headlights
Topao - Shocks, Engine Mounts??? This ones prob a stretch but how about Front Sway Bar??
Rock_it - Replace brake master ... Pads if not done this weekend tool
jay6 - angel eyes
koolio1234 - plugs, basic service, caliper paint, cai

Posted: **Tue Oct 28, 2008 2:00 pm**

lol sh*t are u serious?

I'd just feel bad if I was asking for something like servicing my car @ DIY day, since it's something easily done by a mechanic anywhere, just cos it seems like too much work.
Maybe I'm just too considerate

Oh yea Ben, almost forgot about the intake pipe - I'll grab it off you on DIY day? Don't think you'll have time to put it on for me since I'll probably just be there for couple of hours from 9 till around 11 since I gotta go to harbour life

FTO AUSTRALIA

DIY Day sat the 22nd November start time 9am