Page 6 of 8

Posted: Tue Mar 30, 2010 3:15 pm
by Tippin
mr-charisma wrote: no mate, didn't the front bar give it away? .. it's cause he has it tuned as a snow plow at the moment :lol: ..


..j/k's Val ;)
bahahahaha :lol:

Posted: Tue Mar 30, 2010 6:34 pm
by Valandis91
mr-charisma wrote:
FTEvolution wrote:
Bennoz wrote:What power is it putting out?
Valandis91 wrote:havent tried a 0-100 yet nor has it been on a dyno. but a new garage is opening up next month and holding a dyno night so i might have to attend cos i really want to see what figures its got with just a road tune and no vernier gears.
:facepalm:

Question Val; why not get it tuned as it is now? Are there no decent workshops that can handle it?
no mate, didn't the front bar give it away? .. it's cause he has it tuned as a snow plow at the moment :lol: ..


..j/k's Val ;)
well firstly no one down here knows about tuning eManages, ive had the best tuner down here tell me he'll have a crack but i have to pay him for the time it takes to learn the software and theres no guarantees. plus i dont know whether i should chuck in the verniers or not...

oh and hardy hardy ha. your real funny haha.

Posted: Tue Mar 30, 2010 6:35 pm
by koolio1234
mr plow, thats my name, that name again is mr plow

Re: My FTO is getting the works!

Posted: Sun Apr 25, 2010 10:41 pm
by Valandis91
evoman wrote:No videos and timing from last night? :-(
I wants videos!!!!
didnt do the timing sorry. i did go for a bit of a run on a private road though which i recorded the speedo. but nothing full paced. i might put it up on youtube

Re: My FTO is getting the works!

Posted: Sun Apr 25, 2010 11:07 pm
by evoman
Valandis91 wrote:
evoman wrote:No videos and timing from last night? :-(
I wants videos!!!!
didnt do the timing sorry. i did go for a bit of a run on a private road though which i recorded the speedo. but nothing full paced. i will put it up on youtube now
fixed

Re: My FTO is getting the works!

Posted: Sun Apr 25, 2010 11:15 pm
by Valandis91
evoman wrote:
Valandis91 wrote:
evoman wrote:No videos and timing from last night? :-(
I wants videos!!!!
didnt do the timing sorry. i did go for a bit of a run on a private road though which i recorded the speedo. but nothing full paced. i will put it up on youtube now
fixed
hahahahahahahaha nice one.

alrighty just trying to convert it into a smaller file so it doesnt take ages to upload.

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 10:20 am
by silverGPX
Get it tuned! lol i wanna see results. Im thinking of building an N/A monster and if the cams do nothing i wont bother.

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 4:47 pm
by koolio1234
time to put her on a barge and float her over to the mainland :D

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 5:10 pm
by aza013
koolio1234 wrote:time to put her on a barge and float her over to the mainland :D
agree ^^^^^
we have two good tune shops in Sydney envy imports and pulse racing (dyno tune shops)
so get your car up for a tune :D
we can even make a club day out of it :twisted:

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 5:50 pm
by zuihoujueding
im in for a tune.

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 5:59 pm
by mr-charisma
aza013 wrote:
koolio1234 wrote:time to put her on a barge and float her over to the mainland :D
agree ^^^^^
we have two good tune shops in Sydney envy imports and pulse racing (dyno tune shops)
so get your car up for a tune :D
we can even make a club day out of it :twisted:
....

is what i've been saying since page 1 .. lol :lol:

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 6:05 pm
by rock_it
And Ricol ... lol ...

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 7:30 pm
by aza013
rock_it wrote:And Ricol ... lol ...
Have they got a dyno now?
If so then there are 3 good places in Sydney :lol:

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 8:27 pm
by rock_it
Yeah, always had one .. But just not AWD ... :'(

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 8:43 pm
by aza013
That's right, I recall you told me that a long time ago when you where looking at getting the GSR first tuned.
Runs off to take dementur meds.

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Thu May 13, 2010 9:11 pm
by payaya
Bennoz wrote:lol at all these suggestions.

Its running like sh*t because its outta tune. Just get it dyno tuned properly & all your problems will go away.

If the standard fuel system is only ever operating at max 60% capactiy on a stock motor, its sure as hell aint gonna be much more than that with your setup.
Exactly! I don't understand why it was not turned after all the parts were put in crazy!!

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Sat Jul 03, 2010 10:11 am
by Bennoz
Valandis91 wrote:a lot
:D

Image

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Sat Jul 03, 2010 11:21 am
by Delvance
HAHAHAHAHA

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Sat Jul 03, 2010 12:19 pm
by aza013
Bennoz wrote:
Valandis91 wrote:a lot
:D

Image
I like these little info pics you keep posting up Ben as they are helping me with my spelling :D

Re: My FTO is getting the works! Dyno sheet on page 19.

Posted: Tue Jul 06, 2010 11:18 pm
by MH999
payaya wrote:
Valandis91 wrote:
payaya wrote:
Valandis91 wrote:had nothing to do really today so thought i'd finally do a 0-100 time using the datalogging off the emanage.

Remember this car isnt tuned yet. Is tiptronic. Just not running right.

anyways. the first run i did. no launch did 0-100.... 6.9 seconds. dodgy slipping gear change from 1st to 2nd though
the tried again with loading the torque convertor to 2000rpm.
got 0-100 in 5.2 seconds 8O with a quick good solid gear change as well.

i didnt realise it was that fast. im having difficulty finding the best way to change gears.....

if i keep my foot planted the gearbox sometimes slips due to the torque.
then if i lift off and plant it when it changes gear the wheels spin and i get major torque steer then the revs drop

due to the much larger profile on the non mivec cams it seems to struggle a bit due to being rich and ignition timing being off. but once mivec kicks in... wow. as mivec has only been increased a small amount.

hopefully get it tuned in the coming weeks. will keep updated.
So in basic terms you get an extra to 100km/h quicker by stalling to 2000rpm? That means your car spends 1.7 seconds to get from idle to 2000rpm. Surely going by that you can determine that measuring tool your using is wrong!

Good times but highly unlikely.
why are you so skeptical? it makes sense cos my car struggles a bit down low cos it needs a lot of timing put into it cos the non mivec cams are a lot more aggressive than stock so to the car moving makes sense.

that measuring tool im using is data straight from the ECU...

how could that be wrong? its information straight from the ecu that is then converrted in graphs using the emanage software.

no one else has done this to a fto so how do you or anyone on here know what its capable of?
Skeptical? I just find it hard to believe your car does 5.1 seconds to 0-100 in an auto and is shifting bad! That would put you in the 13's! Also your dyno result tends to go against you as well.

If you wan't me to believe you go to the strip and post your time slips. Even the turbo boys would be happy with your claimed 0-100 times.
+1 valandise we need proof bud :D