hey take a look at this link. for ideas for shiny engine dress up bits.
http://www.hostileperformance.co.uk/Pro ... tegory=720. can u make stuff like this ?
for umm- how bout making these shiny bits
Moderators: IMC, Club Staff
-
- Oldtimer
- Posts: 1347
- jedwabna poszewka promocja
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
- SchumieFan
- Oldtimer
- Posts: 5875
- Joined: Thu Aug 05, 2004 5:00 pm
- Location: GPS signal lost
- Contact:
-
- Grease Monkey
- Posts: 279
- Joined: Thu Jun 24, 2004 5:00 pm
- Location: Queensland-Morayfield
yeah i can but not outta stainless only aluminium and the parts would probably have to be a bit thicker (around 2-3mm). I would just need to make moulds first. Thats the only hard part.
By the way, i've been really busy lately but still workin hard on those taillights and i'm finally getting a camera so i'll have pics up Wednesday night 4 sure.
I've also been workin on the plastic part of the door handle (on the inside of the door) and the door handle cups and the seatbelt guides aswell. I'll be making the first set of those Wednesday and Thursday. So the pics of those will be up in the next few days. Thanks for being patient guys.
By the way, i've been really busy lately but still workin hard on those taillights and i'm finally getting a camera so i'll have pics up Wednesday night 4 sure.
I've also been workin on the plastic part of the door handle (on the inside of the door) and the door handle cups and the seatbelt guides aswell. I'll be making the first set of those Wednesday and Thursday. So the pics of those will be up in the next few days. Thanks for being patient guys.
-
- Apprentice
- Posts: 37
- Joined: Tue Apr 15, 2003 5:00 pm
- Location: Birmingham, UK (at the moment)
- Contact:
If you guys wanted to do a group buy on these parts we are quite happy to ship them over to Australia.shue wrote:hey take a look at this link. for ideas for shiny engine dress up bits.
http://www.hostileperformance.co.uk/Pro ... tegory=720. can u make stuff like this ?
The one on my car is originally from Kempy's in NZ - I believe Kempy's made them?SchumieFan wrote:what is that strut brace? its the same as mine!
Cheers,
Mike.
<P>Hostile Smoker<BR>14.92 sec 1/4 mile<BR>[img]http://www.hostilesmoker.pwp.blueyonder.co.uk/FTOSite/pics/strip.JPG[/img]</P>
-
- Oldtimer
- Posts: 1347
- Joined: Mon Mar 07, 2005 6:00 pm
- Location: 1000 posts n still whoring
aluminium is even better, prefer it over stainless steel. brushed aluminium please. oh btw i'll already started up an eoi for the tail lamps pending your picsumm wrote:yeah i can but not outta stainless only aluminium and the parts would probably have to be a bit thicker (around 2-3mm). I would just need to make moulds first. Thats the only hard part.
By the way, i've been really busy lately but still workin hard on those taillights and i'm finally getting a camera so i'll have pics up Wednesday night 4 sure.
I've also been workin on the plastic part of the door handle (on the inside of the door) and the door handle cups and the seatbelt guides aswell. I'll be making the first set of those Wednesday and Thursday. So the pics of those will be up in the next few days. Thanks for being patient guys.