Looking for LSD, clutch, Shocks

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
RedlineGX
Grease Monkey
Posts: 289
jedwabna poszewka promocja
Joined: Sat Aug 21, 2004 5:00 pm
Location: Barbados
Contact:

Looking for LSD, clutch, Shocks

Post by RedlineGX »

Hi guys wondering if anyone knows anywhere up there that sells an LSD for the fto? Also need some shocks and clutch while i'm at it.... let me know, thanks,...
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Hey there,

you can try www.perfectrun.com.au for a few bits...

I know there is a Cusco LSD available for the FTO but its well pricey. You could try what RichardH did & put an EVO III LSD in. All he had to change was the drive shaft couplings.
RedlineGX
Grease Monkey
Posts: 289
Joined: Sat Aug 21, 2004 5:00 pm
Location: Barbados
Contact:

Post by RedlineGX »

Ok thanks mate
User avatar
FTO338
Oldtimer
Posts: 6712
Joined: Sun Feb 09, 2003 6:00 pm
Location: Port Melbourne: Pimping with RX400h, B200 Turbo.

Post by FTO338 »

There are two different type of Cusco LSD for FTO, 1way & 1.5way.

Part number are as follow

1way - LS145F & LSD145C

1.5way - LSD145C15

Like Ben said they are not cheap, brand new in Jap around $1400 & landed in Oz around $2100 aus including GST & Duty.

Image

Image

Image
DISCLAIMER: The above text is the personal opinion of the author and does not represent the indisputable truth. The author is not responsible for any deaths, injuries or mental illness caused by the above statments.
User avatar
Mitsiman
Approved FTO Australia Trader
Posts: 245
Joined: Fri Jan 31, 2003 6:00 pm
Location: Perth
Contact:

Post by Mitsiman »

RPW has Cusco units for the FTO in stock valued at $1750.00 incl GST plus fright.

Shocks and springs are in stock as well

just gve me a call at rpw.
Racing Performance Works - Mitsubishi Performance Specialists
TheDigitalPimP
Apprentice
Posts: 64
Joined: Fri Aug 19, 2005 5:00 pm
Location: Cheshire, UK
Contact:

Post by TheDigitalPimP »

Bennoz wrote: I know there is a Cusco LSD available for the FTO but its well pricey. You could try what RichardH did & put an EVO III LSD in. All he had to change was the drive shaft couplings.
Any chance of some more info on this? I presume its a cheaper option than using the Cusco one?
[url=http://www.thedigitalpimp.dsl.pipex.com][img]http://www.thedigitalpimp.dsl.pipex.com/FTO-Signature.png[/img][/url]
User avatar
Bennoz
National President
Posts: 23676
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Post by Bennoz »

Send RichardH a PM - or go visit www.ftowa.com thats his site :wink:
TheDigitalPimP
Apprentice
Posts: 64
Joined: Fri Aug 19, 2005 5:00 pm
Location: Cheshire, UK
Contact:

Post by TheDigitalPimP »

Nice one.. thanks! :wink:
[url=http://www.thedigitalpimp.dsl.pipex.com][img]http://www.thedigitalpimp.dsl.pipex.com/FTO-Signature.png[/img][/url]
Post Reply