CamCar

Post by **camcraft** » Mon Apr 20, 2015 11:41 am

herro, here are some pics of my car.(the red one)

Rob Furniss · Post by **Rob Furniss** » Mon Apr 20, 2015 12:00 pm

Looks straighter than my car, i'm sure you'll enjoy fixing her up.

rock_it · Post by **rock_it** » Mon Apr 20, 2015 12:35 pm

It would look hot in this red Cameron...

Post by **bjk** » Mon Apr 20, 2015 12:54 pm

rock_it wrote:It would look hot in this red Cameron...

Nooo

That's my plan!

Post by **dstocks** » Mon Apr 20, 2015 1:27 pm

Yeah, he was eyeing off the new mazda red in the carpark here at work the other day actually.

So far he has made a number of improvements though:

1. Rebuilt and replaced Passengers side door. It started with absolutely no internals and he has put the lot back together again (should have got him to do a DIY)

2. Replaced rear bar. This included replacing rheo.

3. Replaced steering column. The old one had no ignition barrel and the top mount points were damaged. Now it is stable and covered with the appropriate plastic.

4. Rebuild indicator/wiper combo unit from pieces of others.

5. Rebuilt steering wheel including fabricating a new horn button.

Not bad for a 12 year old

rock_it · Post by **rock_it** » Mon Apr 20, 2015 5:08 pm

Good stuff !!!!

PHIL069 · Post by **PHIL069** » Tue Apr 21, 2015 7:42 pm

Well done, I will be watching this thread

You better not make it better than my FTO

Post by **camcraft** » Sun May 10, 2015 7:17 pm

Ive spent a couple more weekends on the blue and red cars and i thought id update my post.
Red Car:
last weekend i fixed the broken window

I used a chisel to remove the glue. this is what it looked like when i pulled it out:

We bought some new glue and used this to glue in the new window.

The next job was to replace one of the headlights. We took the bumper off and took a pic of the old headlight

We took the old one out and put in the new one and here it is all back together.

Blue Car

This weekend, we decided (me and dad) to remove the glue that causes the roof rust out of the blue cars roof. We removed the roof lining and used a hammer and paint scraper to get rid of the glue. Luckily we got it out before any bad rust had set in. Here is some of the glue

And here is the front roof without the glue. If you look carefully you can see small amounts of rust starting to appear.

And here is the back

Once the glue was removed, we used some rust neturaliser to get rid of the rust. We havent had a chance to prime it or put it all back together yet, so more pics when we do that.

Post by **bjk** » Wed Jun 10, 2015 1:09 pm

Don't think I'd ever actually seen where this goes! Does on use a different glue to hold the headliner up, or is there another solution?

Post by **dstocks** » Wed Jun 10, 2015 2:05 pm

Nah, you dont need it. Just remove whats there, prime and the jobs done

silverGPX · Post by **silverGPX** » Wed Jun 10, 2015 7:27 pm

Aww so jealous! What a cool dad and project!

Post by **dstocks** » Sat Jul 25, 2015 5:13 pm

We changed over the injectors and replaced the inlet manifold and throttle body today. was running larger injectors and a magna throttle body. Too much power for someone learning to drive..... Cameron did most of the work and we obviously got it right as its iding nicely and isnt running rich anymore.

Daniel2019 · Post by **Daniel2019** » Sat Jul 25, 2015 5:44 pm

Injectors and throttle body wouldn't do anything without a tune anyway

FTO AUSTRALIA

CamCar

CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar

Re: CamCar