Special Key Lug Nuts.

WoohYeahJunior · Post by **WoohYeahJunior** » Sat Aug 16, 2014 6:26 pm

Hey I was just wondering if anyone has had any problems with special key lug nuts? Is there a special way to get them off or is the key my only option??

WoohYeahJunior · Post by **WoohYeahJunior** » Sat Aug 16, 2014 6:27 pm

Are the lug nuts just seized on or am I going to have to go somewhere to get the removed?

Daniel2019 · Post by **Daniel2019** » Sat Aug 16, 2014 8:07 pm

Need key basically.

WoohYeahJunior · Post by **WoohYeahJunior** » Sat Aug 16, 2014 8:16 pm

Do you know how I'd get around the seized lug nuts?

Daniel2019 · Post by **Daniel2019** » Sat Aug 16, 2014 8:17 pm

Spray WD40 or similar and get a bigger breaker bar.

PHIL069 · Post by **PHIL069** » Sat Aug 16, 2014 8:19 pm

They just look like allen key hex shape to me.

Get a rattle gun or long breaker bar and a impact allen key socket to suit.
or
Take it to a wheel/tyre shop and get them to crack them for you.

PHIL069 · Post by **PHIL069** » Sat Aug 16, 2014 8:21 pm

RU sure there isn't the right tool for the nuts in the console/boot/tool kit bag?

WoohYeahJunior · Post by **WoohYeahJunior** » Sun Aug 17, 2014 12:22 am

I have the key, it's just that I'm having a hard time getting them off so I'll try out the WD40 and bigger breaker bar.

Sahin · Post by **Sahin** » Sun Aug 17, 2014 12:24 am

Put a cross brace one and jack it up on one side
I've had to do that once before

Post by **Shhtuart** » Sun Aug 17, 2014 2:14 am

Those are the type I had that rounded on me after the tyre shop used, from what I assume, an impact wrench to put them on.

Ended up having to drill 2 studs out after a steel bar that my mate welded to it twirled when we tried turning it. The welds didn't break, the thick piece of steel wasn't stronger than the nut lol.

Daniel2019 · Post by **Daniel2019** » Sun Aug 17, 2014 11:32 am

Hit the gym ya mug

adzski · Post by **adzski** » Sun Aug 17, 2014 4:58 pm

i have the same lugs you need a key.

if there seized, use a breaker bar and get some industrial lubricating spray or something for seized bolts. you can also try heating it with blow torch, but you will probably damage the rim.

do not use a rattle gun on these with the key, you will round the inside of the lug and then you are screwed.

WoohYeahJunior · Post by **WoohYeahJunior** » Sun Aug 17, 2014 6:19 pm

Daniel2019 wrote:Hit the gym ya mug

HaH! Good Call!

Post by **Shhtuart** » Sun Aug 17, 2014 7:53 pm

WoohYeahJunior wrote:
Daniel2019 wrote:Hit the gym ya mug
HaH! Good Call!

Reread what I wrote please. I bent steel rod ya Muppet

Daniel2019 · Post by **Daniel2019** » Sun Aug 17, 2014 8:52 pm

Shhtuart wrote:
WoohYeahJunior wrote:
Daniel2019 wrote:Hit the gym ya mug
HaH! Good Call!
Reread what I wrote please. I bent steel rod ya Muppet

Not you!

WoohYeahJunior · Post by **WoohYeahJunior** » Sun Aug 17, 2014 10:19 pm

Yeah I think he was talking to me. Sorry, I'll have to see what happened to them.

Daniel2019 · Post by **Daniel2019** » Sun Aug 17, 2014 10:39 pm

Shhhhhhhtuart has a beard. Enough manliness as it is, no gym required. That's how beards work.

But yeah just get a cheat bar. I have a massive five foot metal bar I use for stuff like that.

FTO AUSTRALIA

Special Key Lug Nuts.

Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.

Re: Special Key Lug Nuts.