anyone know who is good at tuning safc2?

hnm738 · Post by **hnm738** » Wed Nov 10, 2004 5:56 pm

hi everyone
do you know who is good at tuning safc 2???
i just got one installed but dont know of anyone who can besides UAS they are a bit far

Slither · Post by **Slither** » Thu Nov 11, 2004 10:57 am

I take it that means your in sydney??

i know someone but they are in melbourne so that won't help ya much

hnm738 · Post by **hnm738** » Thu Nov 11, 2004 8:33 pm

anyone else have an idea where abouts in sydney?

and a rough cost?

thank you

hnm738 · Post by **hnm738** » Sat Nov 13, 2004 9:22 pm

does anyone have some figures i could try?

thanks

Boris · Post by **Boris** » Sat Nov 13, 2004 11:10 pm

The only suggestion I could make is if you are really after someone that has experinence with tuning, go onto some bigger car forums and look through them... they will probably have more info, as not many people have done this with their fto's.

Slither · Post by **Slither** » Sun Nov 14, 2004 10:07 am

if you want it tuned properly you really need to do it on a dyno, yes basically all FTO's are fundamentaly the same but they are all unique and as such you need to get it tuned specifically to your car. If you just input some numbers then you won't be gettin much out of it. Take it to a mechanic that is experienced with tuning these sort of things, then you should get the maximum benefit out of it

FTO338 · Post by **FTO338** » Sun Nov 14, 2004 12:17 pm

I found that is a major problem in Australia to tune a FTO with Japanese aftermarket ECU products.....

Is either the Mechanic have no idea about FTO but good with aftermaret Japanese tuning products. I had this happen once, & the mechanic f*ck up my car with the wrong setting, & he keep assure me he knows what he is doing, as he done heaps of Jap unit.... well except never on a FTO

The other situation i found is the mechanic have the knowledge of a FTO but don't know how to tune a Japanese aftermarket ECU, so they try to sell you all the others one, & say the Japanese unit are crap

hnm738 · Post by **hnm738** » Sun Nov 14, 2004 6:00 pm

ok thanks
well i dont know anyone that would know the car well?
well except UAS so should i just leave some time to get to uas or does anyone else recommend some one else? in sydney?

thanks