Fto needles
Moderators: IMC, Club Staff
-
- Apprentice
- Posts: 81
- jedwabna poszewka promocja
- Joined: Mon May 02, 2011 5:25 am
- Location: Hobart,Tassie
Fto needles
Just wondering that whether can the fto cluster needle removed? and how to remove it? is it simply pull it out?
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
Re: Fto needles
Yes to both..
They clip on.. So need a small screwdriver to pry off.. But they are temperamental little buggers and can be put back on in the slightly wrong place..
They clip on.. So need a small screwdriver to pry off.. But they are temperamental little buggers and can be put back on in the slightly wrong place..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke![]()
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth
Astron_Boy wrote:Hold me Sooty, I need man comfort.
![]()
- bduffman
- Oldtimer
- Posts: 1450
- Joined: Sun Jan 31, 2010 6:00 pm
- Location: gosford
- Contact:
Re: Fto needles
will prob need it to be recalibrated to be perfect
good tip dont try putting it back on at 0 cause if you take off the little stoper at 0 it will go down to almost 6oclock position
good tip dont try putting it back on at 0 cause if you take off the little stoper at 0 it will go down to almost 6oclock position
- vipfto
- Forum Moderator
- Posts: 4154
- Joined: Mon Oct 29, 2007 5:00 pm
- Location: Adelaide
Re: Fto needles
easy done just put temp and fuel at lowest point and tacho/speedo at 6 0'clock when re-instaling 

FTO GR-TURBO
172KW ATW @ 11PSI
172KW ATW @ 11PSI