Hi all

[patersr03]

hello newbie here on this forum,
i have a serious problem that i beleive you guys can help if not im lost,

my car has stopped going into reverse and 5th unless i raise a piece of plastic that is under the selector that comes out of my gearbox, its a white piece of plastic that curves have way up the selector and sits on a dowel pin,

is anyone able to help at all in where to get this part or even what it is called.

thanks

[dstocks]

Firstly, welcomne to the club.

This link may help you explain a bit better. Its the breakdown of the manual shifter:

http://www.completefto.com.au/modules/p ... sp?bid=185

[patersr03]

hi this is what mitsi tried to sell me as a replacement,

but it aint this piece, on the selector itself is a white block that stops the selectors from moving out of place.

it sits on the selector lever.

i have image of where it sits


Uploaded with ImageShack.us

and the actual piece



Uploaded with ImageShack.us

and the piece on the box itself



Uploaded with ImageShack.us

[Bennoz]

Get you get us a picture of the offending part?

Oh & WTTC

[dstocks]

OK, now were getting closer. Itll be on this pic. Give us the number associated with the bit you want:

http://www.completefto.com.au/modules/p ... sp?bid=184

[patersr03]

im thinking its part 23241 but would need pick of it.

im currently looking around see if i can find one though

[dstocks]

OK, that is called:

MD749352 - Shoe, M/T Select Lever

There are actually 2 part numbers for this (one is for an early model FTO). As I dont know which one yours is, cant give you a definite.

[patersr03]

Mines is a 96 model xx

[dstocks]

OK, I think thats the one I listed. If you can PM me your chassis number, I can confirm (DE3AXXXXXXX). Itll be on the firewall behind the engine.