FTO too high!!!, F=13, R=18(cms), lowering on budget???
Moderators: IMC, Club Staff
- brent88
- Mechanic
- Posts: 724
- jedwabna poszewka promocja
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
FTO too high!!!, F=13, R=18(cms), lowering on budget???
Hey my FTO sits too high!!! want the front to sit about 10-11cms high(lowest part is the side of the veilside front bar) and want the rear to sit about 13 cms high. currently front is 13cms at lowest point and rear is 18cms at lowest point(rounded)
not buying new coilovers for 1k+
$650 cheapest quote for getting lowered decent ampount using springs
$300-$350 springs off ebay etc and maybe do myself(spring clamp 50 bux or so????)
2nd hand coilovers?? $600???? havnt seen any 4 sale
i know putting springs on original shocks can be bad and wear out your dampers but if im lowering it to the heights i want will it be ok?
links and being pointed in the right direction will be appreciated, thanx.
not buying new coilovers for 1k+
$650 cheapest quote for getting lowered decent ampount using springs
$300-$350 springs off ebay etc and maybe do myself(spring clamp 50 bux or so????)
2nd hand coilovers?? $600???? havnt seen any 4 sale
i know putting springs on original shocks can be bad and wear out your dampers but if im lowering it to the heights i want will it be ok?
links and being pointed in the right direction will be appreciated, thanx.
- eddiii
- Veteran Mechanic
- Posts: 923
- Joined: Sun Dec 14, 2008 6:00 pm
- Location: sydney
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
king springs will do the job, im runnin on kings at the moment, and its fine, not too low that will scrape everywhere
their like around 300?

- brent88
- Mechanic
- Posts: 724
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
dont forget i have a veilside bkit, and i wanna put them on myself if i can, think i can anyone?
- eddiii
- Veteran Mechanic
- Posts: 923
- Joined: Sun Dec 14, 2008 6:00 pm
- Location: sydney
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
yes, i have a full VS kit on too, but im running on 19s
- brent88
- Mechanic
- Posts: 724
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
ooh ok, explains why u need to lower, im runnin 17's with 40 profile tyres i think. what type of king springs? super low? low? inch mesurment? cm measurement?
- eddiii
- Veteran Mechanic
- Posts: 923
- Joined: Sun Dec 14, 2008 6:00 pm
- Location: sydney
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
ill get the code for u when theres lights in the morning, i remember seeing the tag still on it, and im on low profile tyres, the rear can only fit 1 finger space inbetween the wheel and body 

- brent88
- Mechanic
- Posts: 724
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
ooh ok cool thanx, did ya fit them yaself?
- Bennoz
- National President
- Posts: 23676
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
Lowering springs. Do it yourself. A little bit time consuming, but not that hard:
http://ftoaustralia.com/v3/viewtopic.php?f=23&t=8761
http://ftoaustralia.com/v3/viewtopic.php?f=23&t=8761
- brent88
- Mechanic
- Posts: 724
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
really good post bennoz, really wouldent wanna replace everything coz if i was going to do that id just buy second hand coilovers. maybe if i replace the springs only but only drop 2-3cms at back and maybe 1.5 at front?
- brent88
- Mechanic
- Posts: 724
- Joined: Tue Feb 23, 2010 6:00 pm
- Location: bendigo, victoria, Australia
- Contact:
Re: FTO too high!!!, F=13, R=18(cms), lowering on budget???
or...... can anyone put me onto some1 who wants to sell me some 2nd hand coilovers? or know somewhere i can get new 1's that arent too shite for under a grand?