Leaking Coolant !

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
dj_ules
Mechanic
Posts: 585
jedwabna poszewka promocja
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Leaking Coolant !

Post by dj_ules »

hey guys im leaking coolant from the left hands side where the belts are., started overheating a bit and noticed no coolant, check the oil seems to be fine not milky colour.. but i do have a bit of oil leakin around the engine bay think a few seals are gone. can anyone else give me some pointers to what it could possibly be ?
topao
Veteran Mechanic
Posts: 825
Joined: Thu Oct 05, 2006 5:00 pm
Location: Sydney
Contact:

Post by topao »

Did you check your hoses?
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

That will be the water pump be prepared to spend $$$$
may as well get timing belt seals tensioners done while in there two incl parts cost will be around $1000 incl labour too
User avatar
Ecnerual
Apprentice
Posts: 76
Joined: Wed Oct 17, 2007 5:00 pm
Location: Sydney

Post by Ecnerual »

bro im having the same problem with my car...

its a water pump!! the only problem is... that you cant just got into any mechanic and get a water pump for an FTO.. you have to find one...

plus considering we have the same problem... Im taking the first one =D!
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

Ecnerual wrote:bro im having the same problem with my car...

its a water pump!! the only problem is... that you cant just got into any mechanic and get a water pump for an FTO.. you have to find one...

plus considering we have the same problem... Im taking the first one =D!
They are generic across all the 6A motor range, just go to repco etc and ask for waterpump to suit HJ Galant ;)
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

hmmm whats the price for a water pump ... ?
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

pump from $60+
User avatar
payaya
Oldtimer
Posts: 3670
Joined: Sat Sep 06, 2003 5:00 pm

Post by payaya »

Damn how many leaky water pump threads lately???
User avatar
zuihoujueding
Oldtimer
Posts: 1980
Joined: Thu Aug 31, 2006 5:00 pm
Location: Sydney

Post by zuihoujueding »

get an electric one!
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

hmmm anyone have part number they can help me out with?
also the part no for the gasket?
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

vipfto wrote:That will be the water pump be prepared to spend $$$$
may as well get timing belt seals tensioners done while in there two incl parts cost will be around $1000 incl labour too
hey just checked camskill its about 32pound for waterpump. why will it cost 1000$ inc labour to repair ?? why should i get timing belt seal tensioners etc done?
do they need to come off ?
User avatar
payaya
Oldtimer
Posts: 3670
Joined: Sat Sep 06, 2003 5:00 pm

Post by payaya »

Because the waterpump is driven off your timing belt. You may as well do the timing belt if its close to due as its a pain in the arse to remove the belt.
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

ah for F#$# sake !!!
just found this on ebay DAYCO timing belt ? any one reccomend this to me .? brand wise is ok ?? is this the full kit what i will need for the job !
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0251996813
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

ok looks like im gonna spend the cash and get this biatch done !!
can anyone reccomend anything else i should get done while the timing and water pump gets fixed ?? some gaskets ?? round that area or something ???
cheers
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

yeah mate the cam seals, idler, tensioner are a must and possibly the hydrolic tensioner only if it needs to be replaced your mech should be able to tell when he removes it. Thats about it unless your bit cashed up then go for new plugs and leads while plenum is off and new AC and ALT belts

and the Dayco belt is fine they all have to made to specific criteria just make sure you get one for GPX or GR as the GPX has couple more teeth on the belt for whichever model you have ;)
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

hmm rang repco (Rip Every Poor c**t Off)
the only pumps they have is silverline for 157$ and GMB for 227$
does that sound right to you guys ??? i dont know where this 60$ figure is from ?
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

nope that is rip off alright, try kempys.co.nz or camskill in uk will cost under 100 delivered and usualy recieve it within a week and you can find them for 60 just need to shop around oh and tell them for HJ galant at repco prob cheaper in their system as they seem to like to mark up costs for FTO or imports even though they use same parts
User avatar
dj_ules
Mechanic
Posts: 585
Joined: Mon Nov 22, 2004 6:00 pm
Location: Newcastle

Post by dj_ules »

yeah thats what i said hj galant !! never mention fto at all.. strange..
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

Yeah I usually only buy parts from there like consumables (pads, bulbs, oil, boots etc) never any other mechanical parts unless I' desperate or have no choice
User avatar
I8A4RE
QLD Coordinator
Posts: 9594
Joined: Mon Aug 28, 2006 5:00 pm
Location: BOOSTIN in front of you
Contact:

Post by I8A4RE »

Dayco is a good brand absolutly nothing wrong with it.
Post Reply