Got a problem with your FTO? ask about it here
Moderators: IMC , Club Staff
xj265
Mechanic
Posts: 778 jedwabna poszewka promocja
Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Wed Jun 10, 2009 11:36 am
Yesterday when i was driving home i could hear something coming from the rear passenger wheel
Sounded like something grinding on something, so i had a look at the brake pad and it looked pretty worn...
Could the noise be the worn brake pads? If so where could i get some rear pads from? I've done a search and EBC greens, RB74's have appeared now and then
Any help would be appreciated
chuster
Apprentice
Posts: 89 Joined: Fri May 01, 2009 5:00 pm
Location: Perth
Contact:
Post
by chuster » Wed Jun 10, 2009 8:39 pm
Are you referring to that screeching noise from worn brake pads?
Last edited by
chuster on Wed Jun 17, 2009 1:14 am, edited 1 time in total.
Storm
Veteran Mechanic
Posts: 841 Joined: Wed Feb 01, 2006 6:00 pm
Post
by Storm » Wed Jun 10, 2009 9:56 pm
You have a bent piece of metal on the pads which gives you an audible warning when they are low, which IIRC "rings" rather than scrapes but hey, every car is different in the noises it makes
xj265
Mechanic
Posts: 778 Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Wed Jun 10, 2009 10:04 pm
oh ok
thanks
Ecnerual
Apprentice
Posts: 76 Joined: Wed Oct 17, 2007 5:00 pm
Location: Sydney
Post
by Ecnerual » Wed Jun 10, 2009 11:30 pm
your brake pads need to be changed...
i highly doubt its your brake disc's
but if your looking for new brake disc's and depending on your budget
i would go with DBA's or RDA's if your strapped for cash
can order from Autobarn or from repco...
standard discs shouldnt be more than $100 a corner
Bennoz
National President
Posts: 23676 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Jun 11, 2009 7:36 pm
^^ Agree on all of the above.
Shame you're not in NSW, I'd change 'em for a bag of blow & a hooker
xj265
Mechanic
Posts: 778 Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Thu Jun 11, 2009 8:05 pm
thanks guys for your help
um now what brake pads should i get? im not after anything major and am pretty poor at this point in time...lol
so any recomendations would be appreciated
Bennoz
National President
Posts: 23676 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Jun 11, 2009 8:11 pm
A house & garden set of mintex or bendix would do the trick. Dont pay any more than $50.
xj265
Mechanic
Posts: 778 Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Thu Jun 11, 2009 8:13 pm
Where can i get them from bennoz?
Bennoz
National President
Posts: 23676 Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:
Post
by Bennoz » Thu Jun 11, 2009 8:15 pm
Oh & here's the Bendix part numbers etc. Bendix are quite common & their part numbers can be transferred to any brand.
xj265
Mechanic
Posts: 778 Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Fri Jun 12, 2009 6:03 pm
got new rear pads put on today
thanks bennoz
J
Oldtimer
Posts: 2182 Joined: Fri Apr 18, 2008 5:00 pm
Location: Sydney West
Contact:
Post
by J » Mon Jun 15, 2009 8:51 pm
did that solve the noise mate?
xj265
Mechanic
Posts: 778 Joined: Tue Oct 28, 2008 5:00 pm
Location: Sunnie Coast
Post
by xj265 » Tue Jun 16, 2009 9:53 am
Yep sure has!